769323
43
Zoom out
Zoom in
Previous page
1/96
Next page
D-307500 PowerMaster 360 Installer's Guide 43
Option
Configuration Instructions
Options: Enable (default); Disable.
4.6.6 Configuring upload / download remote programming access permissions
Using a PC, the PowerMaster-360 can be configured (by upload/download) either locally or from remote via GPRS
cellular communication.
Local programming can be performed by directly connecting the computer to the panel's USB port using the Remote
Programmer PC Software.
Remote programming via GPRS is performed using a Visonic PowerManage server and related Remote Programmer
PC software. The PowerManage server calls from a cellular modem to the Panel's SIM card number. The panel checks
the caller ID and if identical with any of the two callers ID 1 or 2 programmed in the GPRS UP/DOWNLOAD menu (see
table below), the panel initiates a GPRS connection with the respective IP Receiver 1 or 2 (as configured in section
4.6.3 options 21 & 22). When connection is established, the monitoring company can perform the upload/download
procedure via the established secured GPRS connection. For further information refer to the PowerManage User's
Guide.
In this section you can configure the access permissions (i.e. security codes and identification) and determine the
functionality of the upload/download procedures via GPRS channel.
04:COMMUNICATION  6:UP/DOWNLOAD  MENU required
Enter 6:UP/DOWNLOAD, select the menu to configure (see guidance above and in section 4.6.1), then refer to the
table below for configuration instructions.
Option
Configuration Instructions
UP/DOWNLOAD PARAM
Configure the Upload/Download functionality. The functionality is determined through a sub-
menu of the UP/DOWNLOAD option as shown below.
To program:
Press to enter the UP/DOWNLOAD sub menu and then select and configure each of
the sub-menu options as shown below. When done, press to return.
Remote access
Enable or disable the remote access to the system. If disabled, the system cannot be
accessed remotely thereby inhibiting the Upload/Download and the Remote Control via
GSM analog communication channel (see Chapter 5 in the User's Guide).
Options: enabled (default); disabled.
Mast. UL/DL code
Enter the 4-digit password (Master Installer download code) code that will allow the Master
Installer to access the system remotely and upload/download data to the PowerMaster-360
panel.
Note: 0000 is not a valid code and must not be used.
Inst. UL/DL code
Enter the 4-digit password (Installer download code) code that will allow the Installer to
access the system from remote and upload or download data into the PowerMaster-360
panel.
Notes:
1. 0000 is not a valid code and must not be used.
2. The installer can configure via UL/DL only the options he is authorized to configure from
the control panel.
UL/DL modes
Define whether the downloading/uploading can be performed in Disarm mode (state) only or
in all modes (Away, Home, and Disarm).
Options: in all modes (default) or in DISARM only.
(Return)
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Visonic Powermaster-360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Visonic Powermaster-360 in the language / languages: English as an attachment in your email.

The manual is 2.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info