769323
42
Zoom out
Zoom in
Previous page
1/96
Next page
42 D-307500 PowerMaster 360 Installer's Guide
4.6.4 Configuring event reporting to private users
The PowerMaster-360 system can be programmed to send various SMS event notifications such as alarm, arming or
trouble events, if a GSM option is installed. The system can send the messages also to 4 emails, MMS and SMS
telephone numbers via the server. These reports can be programmed either instead of or in addition to the reports
transmitted to the monitoring company. In this section you configure:
The specific events you require the system to report.
The 1st, 2nd, 3rd, and 4th SMS numbers of the private subscribers.
Event notification messages to be sent to 1st, 2nd, 3rd, and 4th private emails and private MMS and SMS telephone
numbers via the server.
SMS Permission defines if the panel accepts SMS commands from any number or only from known numbers.
For a detailed description of this menu options, refer to the User’s Guide Chapter 6, section B. 12.To select and
configure an option follow the instructions below. Additional guidance is provided in section 4.6.1.
04:COMMUNICATION  4:PRIVATE REPORT  MENU required
The 4:PRIVATE REPORT menus and sub-menus configuration is shown in the table in section 4.6.1. For a detailed
description of the menus options, refer to the User's Guide Chapter 4, section B.12.
4.6.5 Configuring motion cameras for visual alarm verification
The PowerMaster-360 can communicate to Monitoring Stations (equipped with Visonic PowerManage server) with
image clips captured by Motion Cameras (models Next CAM PG2, Next-K9 CAM PG2 and TOWER CAM PG2). The
Monitoring Station can use the video clips for verification of Burglary alarms detected by the Motion Cameras. The
system can be configured to capture image clips also upon occurrence of Non-Burglary alarms (Fire, Duress,
Emergency, and Panic). The server can then forward the images to the management computer of the Monitoring
Station or to 4 private emails and/or 4 mobile phones by MMS images.
In addition, the Monitoring Station can log into the PowerManage server and request the system to provide image clips
On Demand and to forward them as defined in the PowerManage application. To protect customers' privacy, the
PowerMaster-360 can be customized to enable the On Demand View only during specific system modes (Disarm,
Home, and Away), and also to a specific time window following an alarm event.
04:COMMUNICATION  5:MOTION CAMERAS  MENU required
Enter 5:MOTION CAMERAS, select the menu you require to configure (see guidance above and in section 4.6.1), then
refer to the table below which provides you with detailed configuration instructions.
Option
Configuration Instructions
VIEW ON DEMAND
By enabling the On Demand View, you can determine during which arming modes (system
states) the On Demand View will be permitted. In the next option VIEW TIME WINDOW you can
determine when, during the permitted arming modes, the On Demand View will be enabled.
Options: disabled (default); in all modes; in AWAY only; in HOME only; in HOME & AWAY;
DISARM & AWAY; DISARM & HOME; and in DISARM only.
VIEW TIME WINDOW
VIEW TIME WINDOW
menu appears only if
VIEW ON DEMAND
was enabled
If the On Demand View is enabled in the previous option, you can further determine whether
the On Demand View will be possible at any time during the selected arming modes (Always)
or restricted only to a specific limited time window that follows an alarm event.
Options: Always (default); Alarm + 5 min.; Alarm + 15 min.; Alarm + 1 hour
VIEW OTHER ALARM
Define whether the system will capture and forward image clips also upon occurrence of Non-
Burglary alarms (Fire, Duress, Emergency, and panic).
Options: Enable (default); Disable.
KIDS COME HOME
Define that upon PIR-camera detection, the system will send up to 4 images to a 3rd party
server if the system is disarmed via keypad or proximity tag by latchkey users 5 to 8 and only
when the system was in Entry Delay or the Abort Time was enabled.
Options: Enable; Disable (default).
Note: At least one PIR camera must be defined as one of the following zone types:
Perim-Follow / Inter-Follow / Exit/Entry 1 / Exit/Entry 2.
UPLOAD FILM
Define whether to enable / disable the sending of images to the PowerManage server.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Visonic Powermaster-360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Visonic Powermaster-360 in the language / languages: English as an attachment in your email.

The manual is 2.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info