769323
36
Zoom out
Zoom in
Previous page
1/96
Next page
36 D-307500 PowerMaster 360 Installer's Guide
Step 1
Step 2
Step 3
Step 4
Select COMMUNICATION
Select Communication
Sub-menu option
Select the Communication Parameter you require to configure
See
4:PRIVATE REPORT
SMS REPORT
EMAIL BY SERVER
4.6.4
REPORTED EVENTS
1st E-MAIL
See also
User's
Guide
Chap. 4
Section
B.12
1st SMS tel#
2nd E-MAIL
2nd SMS tel#
3rd E-MAIL
3rd SMS tel#
4th E-MAIL
4th SMS tel#
SMS Permission
SMS/MMS BY SRVR
1st SMS/MMS
2nd SMS/MMS
3rd SMS/MMS
4th SMS/MMS
5:MOTION CAMERA
VIEW ON DEMAND
4.6.5
VIEW TIME WINDOW
VIEW OTHER ALARM
UPLOAD FILM
KIDS COME HOME
6:UP/DOWNLOAD
UP/DWNLOAD PARAM
GPRS UP/DOWNLOAD
4.6.6
Remote access
Panel SIM Tel. #
Mast. UL/DL code
1st caller ID#
Inst. UL/DL code
2nd caller ID#
UL/DL Modes
7:BROADBAND 1
DHCP Client
RESET MODULE
4.6.7
Manual IP
PLNK curr.params
Curr.IP address
Curr.subnet mask
8:WiFi
Current Gateway
Current Path
ACCESS-POINT
A.POINT MOE
START A.POINT
STOP A.POINT
4.6.8
4.6.2 Configuring GSM-GPRS (IP) - SMS cellular connection
The GSM/GPRS module is capable of communicating with the Monitoring station receiver by GPRS or SMS channels.
The GPRS channel is always enabled. If for any reason the GPRS module is not able to communicate successfully, the
message is sent by SMS.
04:COMMUNICATION  2:GSM/GPRS/SMS PLINK GPRS  MENU
Enter 2:GSM/GPRS/SMS, select the menu you require to configure (see guidance above and in section 4.6.1), then
refer to the table below which provides you with detailed explanations and configuration instructions for each option.
Option
Configuration Instructions
SMS REPORT
Define whether the system will report events to the Monitoring Stations' SMS receivers
via the SMS Channel. For further information, see section 4.6.3 options 26 & 27.
Options: disable (default); enable.
GPRS APN
Enter the name of the APN Access Point used for the internet settings for the GPRS
1
The name of the product is PowerLink3 IP Communicator
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Visonic Powermaster-360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Visonic Powermaster-360 in the language / languages: English as an attachment in your email.

The manual is 2.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info