580332

Visonic PowerMaster-10-30 G2 Version 18 Manual

27
Zoom out
Zoom in
Previous page
1/74
Next page
MENUS AND FUNCTIONS
26 D-304829 PowerMaster-10/30 G2 User's Guide
A. To Program a User Code
B. To Set Partitions Authorization
*
Additional Information (section B.4)
1
For detailed instructions on how to select the setting options – refer to sections A.1 and A.2.
2
The display shows the 1
st
User Code (Master User) in the list of 8 User Codes (in PowerMaster-10 G2
system) / 48 User Codes (in PowerMaster-30 G2). If you have not yet changed the default code 1111, we
recommend that you change it now.
3
a. The display shows the user code currently programmed in this location (e.g. 5327).
b. The cursor blinks on the first digit of the code.
c. If the location is free the display will be blank ( - - - - ).
4
You can move the cursor to the next or previous digit by pressing
or . Pressing
erases the digit of the cursor + all digits right of the cursor.
5
a. The new code is momentarily displayed without the cursor before reverting to step 3.
b. If Partition is enabled, continue to step 6.
6
You can now repeat steps 3 - 5 to program or edit another user code. To end this session and to select
other menu options or to quit programming – follow the instructions in section A.2.
7
This setting can be performed only after completing steps 1 - 5 of section B.4A.
8
The
symbol now appears next to the newly selected Partitions.
9
You can now repeat steps 3 - 7 to program or edit another user code.
*
When PARTITIONING is enabled.
1.
USER CODES
Enter the [USER SETTINGS] menu, select the [USER CODES] option and
press .
1
2.
User 01 Code
The first user code "User 01 Code" is displayed.
2
or
At the blinking cursor position, key in the User Code you wish to program , for
example, [06] for user code 6, or alternatively click the or
button until the display reads, [User 06 Code].
3.
User 06 Code
When the user code you wish to program appears on the display, press
.
4.
User 06 :
234
To program or edit the code,
at
the blinking cursor position
enter the 4 digit
code
, for example, “
1234
”, using the numerical keypad.
3,
4
5.
When done, press .
User 06 : 1234
☺
Return to step 3 A "Happy Tune"
☺
sounds. The display confirms the saved code.
5,
6
6.
SET PARTITIONS
The display will read [SET PARTITIONS].
7
7.
U06: P1 P2 P3
Use the keypad keys , , to change the status of the
partitions P1, P2 & P3, respectively.
8
U06: P1 P2 P3
When you are satisfied with the setting, for example, User 6 is authorized
with Partition 1 and 3 only, press to confirm.
☺
Return to step 3 A "Happy Tune"
☺
sounds. The display confirms the Partition setting.
9
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Visonic PowerMaster-10-30 G2 Version 18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Visonic PowerMaster-10-30 G2 Version 18 in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Visonic PowerMaster-10-30 G2 Version 18

Visonic PowerMaster-10-30 G2 Version 18 Installation Guide - Dutch - 112 pages

Visonic PowerMaster-10-30 G2 Version 18 User Manual - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info