667338
47
Zoom out
Zoom in
Previous page
1/290
Next page
ENES
45
PTEL
0478 192 9807 C - EN
15.4 Closing the engine hood
Close the engine hood (1) carefully and
slowly and allow to engage.
15.5 Removing the discharge chute
The discharge chute can be removed
without the use of additional tools for
cleaning. The engine cannot be started
when the discharge chute is removed.
The following points must be observed
before removal:
Stop the engine. (Ö 13.3)
Remove the ignition key and keep it in a
safe place.
Engage the parking brake. (Ö 8.14)
Remove the grass catcher box.
(Ö 13.10)
Unscrew the retaining nuts (1), remove the
discharge chute (2).
15.6 Installing the discharge chute
The following points must be observed
before installation:
Engage the parking brake. (Ö 8.14)
Remove the grass catcher box.
(Ö 13.10)
Select the lowest cutting level.
Push the discharge chute (1) in to the stop.
When pushing in, ensure that the
discharge chute fits over the discharge
opening of the mowing deck on all sides.
Screw in the retaining nuts (2) and tighten.
15.7 Fuel cock
The flow of fuel in the fuel line is enabled
or interrupted by opening or closing the
fuel cock.
The fuel cock is located on the left under
the fuel tank.
Stop the engine. (Ö 13.3)
Engage the parking brake. (Ö 8.14)
The "discharge chute removed"
symbol appears on the display on
the models MT 6112 C,
MT 6112 ZL, MT 6127 ZL when the
ignition key is turned to the "lights
on" or "ignition on" position.
(Ö 10.5)
When cleaning the discharge chute
or each time it is removed, also
check the level sensor (grass
catcher box) and clean if
necessary.
Warning!
The discharge chute is one of the
protective covers. Do not operate
the ride-on mower with a damaged
discharge chute.
When installing the discharge
chute, make sure that the switch (3)
is actuated.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MT 6127ZL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 6127ZL in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 24,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 6127ZL

Viking MT 6127ZL User Manual - German, Dutch, French, Italian - 284 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info