667338
49
Zoom out
Zoom in
Previous page
1/290
Next page
ENES
47
PTEL
0478 192 9807 C - EN
15.10 Topping up engine oil
Open the engine hood. (Ö 15.3)
Check the engine oil filling
level. (Ö 15.8)
Top up the engine oil as per the engine
instruction manual – use a suitable
funnel.
Close the engine hood. (Ö 15.4)
15.11 Checking the safety devices
Checking the brake switch:
Sit on the driver's seat.
Stop the engine and allow it to come to
a standstill. (Ö 13.3)
Release the parking brake and do not
actuate the brake pedal.
Turn the ignition key to the "start
engine" position. (Ö 8.1)
The engine cannot be started when the
brake switch is functioning correctly.
Checking the seat switch:
Sit on the driver's seat.
Start the engine (Ö 13.2) and allow it to
run at maximum speed.
(Ö 8.2), (Ö 8.3)
Engage the mowing deck.
(Ö 8.5), (Ö 8.6)
Relieve the weight on the driver's seat
by standing up slowly and carefully. Do
not dismount!
The engine will be switched off if the
seat switch is functioning.
Checking the grass catcher box switch:
Sit on the driver's seat.
Start the engine (Ö 13.2) and allow it to
run at maximum speed.
(Ö 8.2), (Ö 8.3)
Engage the mowing deck.
(Ö 8.5), (Ö 8.6)
From the driver's seat, tilt (empty) the
grass catcher box upwards using the
grass catcher box emptying lever.
(Ö 8.16)
The engine will be switched off and the
mowing deck disengaged if the grass
catcher box switch is functioning.
Checking the discharge chute switch:
Remove the discharge chute (Ö 15.5)
and then attach the grass catcher box
again. (Ö 13.10)
Sit on the driver's seat.
Press the brake pedal to the stop and
hold. (Ö 8.13)
Turn the ignition key to the "start
engine" position. (Ö 8.1)
The engine cannot be started when the
discharge chute switch is functioning
correctly.
Checking the reverse mowing safety
switch:
Sit on the driver's seat – do not press
the reverse mowing safety switch.
Start the engine (Ö 13.2) and allow it to
run at maximum speed.
(Ö 8.2), (Ö 8.3)
Engage the mowing deck.
(Ö 8.5), (Ö 8.6)
Select reverse driving direction and
drive off. (Ö 8.9)
If the reverse mowing safety switch is
functioning, the mowing deck will be
disengaged after 1 second.
15.12 Cleaning the level sensor (grass
catcher box)
The level sensor (grass catcher box) may
become soiled when mowing wet or moist
grass. This results in impaired function.
By way of prevention, clean the level
sensor following each mowing operation or
each time the discharge chute is cleaned.
Stop the engine. (Ö 13.3)
Remove the ignition key and keep it in a
safe place.
Engage the parking brake. (Ö 8.14)
Remove the grass catcher box.
(Ö 13.10)
Avoid damage to the machine.
Avoid exceeding and falling below
the correct engine oil level.
Risk of injury!
The safety devices must only be
checked from the driver's seat.
No persons, particularly children, or
animals must be in the vicinity.
Proper functioning of the safety
devices must be checked at least
once a month.
Following longer periods without
use, for low-use machines or after
repairs, always check all safety
devices before using again.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MT 6127ZL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 6127ZL in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 24,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 6127ZL

Viking MT 6127ZL User Manual - German, Dutch, French, Italian - 284 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info