Manual Viking MT 6127ZL (page 46 of 290) (English, Portuguese, Spanish)

667338

Zoom out

Zoom in

1/290

0478 192 9807 C - EN

– Observe the instructions on cleaning

the engine (see engine instruction

manual).

– Remove grass residues from the

gearbox (by brushing off), remove any

other dirt from the gearbox.

– Check the cooling ribs of the engine

and hydrostatic gearbox and clean if

necessary.

Maintenance operations after the first

10 operating hours (initial operation):

– An inspection by your specialist dealer

is recommended.

VIKING recommends

VIKING specialist dealers.

Maintenance operations after every

25 operating hours:

– Check the blade fastenings and

mowing blade wear limits.

– Check the installation position of the

mowing blades (MT 5112 Z,

MT 6112 C, MT 6112 ZL, MT 6127 ZL).

Maintenance operations after every 50

operating hours:

– Check the installation position of the

mowing deck. (Ö 15.14)

Maintenance operations after every 100

operating hours:

– Replace the mowing blades.

– Maintain the V-belt or toothed belt.

– Inspection by a specialist dealer.

VIKING recommends VIKING specialist

dealers.

15.2 Cleaning the machine

● Stop the engine. (Ö 13.3)

● Engage the parking brake. (Ö 8.14)

● Remove the ignition key and keep it in a

safe place.

● Remove the mowing deck. (Ö 14.1)

● First, remove accumulated clipping

deposits in the mowing deck housing

using a stick.

● Clean the underside of the mowing

deck with water and a brush.

● When cleaning the upper side of the

mowing deck, ensure that the V-belt

and toothed belt do not get wet – never

spray water into the openings in the

covers.

● Clean the discharge chute using

running water and a brush when

removed and well away from the

machine.

● Remove grass residues from the

mowing deck, the engine compartment

and the gearbox. Clean the cooling ribs

of the engine and gearbox.

● Clean the mowing blades with water

and a brush – under no circumstances

should you hit the mowing blades (e.g.

with a hammer) to loosen dirt.

● Remove the grass catcher box and

clean using running water and a brush

well away from the machine. (Ö 13.10)

15.3 Opening the engine hood

Hold the engine hood (1) with one hand at

the handle (2) and open by pulling gently

upwards.

Fold the engine hood (1) forwards to the

stop.

All required maintenance

operations on the brake system and

gearbox are carried out during the

inspection.

Avoid damage to the machine.

Never spray water (high pressure

cleaner) onto engine components,

seals, electrical components

(battery, wiring harness, etc.) and

bearing points. This may result in

damage and expensive repairs.

Do not use aggressive cleaning

agents. These cleaners can

damage plastics and metals,

impairing the safe operation of your

VIKING machine. If you are unable

to remove the dirt with water using

a brush or a cloth, VIKING

recommends the use of a special

cleaner (e.g. STIHL special

cleaner).

Always remove the mowing deck

for cleaning and maintenance

operations.

Danger of burns!

Allow the engine to cool down

before opening the engine hood.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 6127ZL in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 24,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 6127ZL

Viking MT 6127ZL User Manual - German, Dutch, French, Italian - 284 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Viking MT 6127ZL Manual

Product: