Manual Viking MT 6112ZL (page 17 of 290) (English, Portuguese, Spanish)

667337

17

Zoom out

Zoom in

Previous page

1/290

Next page

ENES

15

PTEL

0478 192 9807 C - EN

Cleaning:

Following operation, the entire ride-on

mower and the attachments must be

cleaned. In particular, all grass residues

must be removed because the moisture

these contain leads to damage in the long

term.

VIKING does not recommend the use of

high pressure cleaners. (Ö 15.2)

Remove the mowing deck for cleaning

operations. Never clean the mowing deck

using water under high pressure (e.g.

garden hose) or by engaging the mowing

deck in puddles of water.

Never drive close to an edge or a ditch for

the purpose of cleaning (e.g. the frame of)

the ride-on mower.

In order to prevent fire hazards, keep the

engine, cooling ribs, battery compartment,

area around the fuel tank and exhaust free

from grass, leaves or escaping oil (or

grease).

Always clean the grass catcher box.

Maintenance operations:

Only maintenance operations described in

this instruction manual may be carried out.

Have all other work performed by a

specialist dealer.

If you do not have the necessary expertise

or auxiliary equipment, please always

contact a specialist dealer.

VIKING recommends that you have

maintenance operations and repairs

performed exclusively by a VIKING

specialist dealer.

VIKING specialist dealers regularly attend

training courses and are provided with

technical information.

Only use tools, accessories or

attachments approved for this machine by

VIKING or technically identical parts.

Otherwise, there may be a risk of

accidents resulting in personal injury or

damage to the machine. If you have any

questions, please consult a specialist

dealer.

The characteristics of original VIKING

tools, accessories and spare parts are

optimally adapted to the machine and the

user's requirements. Genuine VIKING

spare parts can be recognised by the

VIKING spare parts number, by the

VIKING lettering and, if present, by the

VIKING spare parts symbol. On smaller

parts, only the symbol may be present.

The ride-on mower and all attachments

should be inspected once annually by a

specialist dealer. (Ö 15.1)

Always keep warning and information

stickers clean and readable. Damaged or

missing stickers must be replaced by new,

original plates from your VIKING specialist

dealer. If a component is replaced with a

new component, ensure that the new

component is provided with the same

stickers.

For safety reasons, fuel-carrying

components (fuel line, fuel cock, fuel tank,

tank cap, connections, etc.) must be

checked regularly for damage and leaks

and replaced by a technician if necessary

(VIKING recommends VIKING specialist

dealers).

Before starting work on or near electrical

components, the negative (–) cable must

be disconnected from the battery.

The machine is equipped with numerous

safety devices. These devices must not be

removed or modified (bypassed, etc.) and

must be checked at regular intervals.

Operations on the safety devices must

only be carried out by a technician.

VIKING recommends VIKING specialist

dealers.

Be aware that moving one cutting tool

results in the turning of the other cutting

tools.

Ensure that all nuts, pins and screws,

especially the blade fastening screws, are

securely tightened, so that the machine is

in a safe operating condition.

For safety reasons, worn or damaged

parts must be replaced immediately.

Check the grass catcher unit (e.g. grass

catcher box, discharge chute) regularly for

wear, damage or loss of functionality.

Particular care is required when working

under the machine, due to the weight of

the ride-on mower. If necessary, contact a

specialist dealer; VIKING recommends

VIKING specialist dealers. They will have

a workshop pit or a hydraulic working

platform.

Check the secure fastening of the front

and rear wheels.

Always maintain the ride-on mower and

the attachments in perfect operating

condition. All safety devices must be

present and be in perfect operating

condition.

Ensure that the tyres have the correct tyre

pressures. The tyre pressures specified in

the instruction manual must not be

exceeded.

Only perform work on the mowing blades

when wearing thick work gloves and

exercising extreme care.

Check the function of the brakes at

regular, short intervals and, if necessary,

have the required adjustments or

1

MT6112C
I get continuity when i connect M(agneto) and G(round) terminals in Stop position on ignition key, so great. But in the block that connects to it, the slot is empty, and te diagram shows LASBYM without any wire going to M. Could you explain please? Submitted on 16-5-2023 at 16:49
Reply Report abuse
how to remove a flat battery from vikking ride on
Submitted on 2-12-2022 at 16:14
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Viking MT 6112ZL at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 6112ZL in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 24,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 6112ZL

Viking MT 6112ZL User Manual - German, Dutch, French, Italian - 284 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info