667212
39
Zoom out
Zoom in
Previous page
1/454
Next page
37
DEFRNLITESPTNOSVDAPLSKHUHRCS EN
0478 121 9917 E - EN
The user must ensure that the machine is
only operated with a power supply which
meets this requirement. If necessary, this
information can be obtained from the local
electric power company.
11.2 Strain relief
During work, the strain relief
prevents any unintentional
disconnection of the electric cable and any
resulting damage to the mains connection
on the machine.
For this reason, the electric cable must be
fed through the strain relief.
Form a loop in the electric cable (1) and
guide it through the opening (2).
Then push the loop over the hook (3)
and pull it tight.
11.3 Switching on lawn mower
Press and hold down start button (1).
Pull motorstop lever (2) to handlebar
and hold.
Start button (1) can be released once
motorstop lever (2) is pressed.
11.4 Switching off lawn mower
Release motorstop lever (1).
Motor and mowing blade come to
a stop after a short run-down time.
11.5 Level indicator
The grass catcher box features a
level indicator (1) on the upper part
of the catcher box.
The flow of air that is created by the rotary
movement of the mowing blade and is
responsible for filling the grass catcher box
raises the level indicator (2):
The grass catcher box is filled with
clippings.
When the grass catcher box is full, this
flow of air is reduced and the level
indicator drops (3):
Empty filled grass catcher box (Ö 11.6).
11.6 Emptying grass catcher box
Switch off motor (Ö 11.4) and
detach grass catcher box
(Ö 8.3).
Open grass catcher box at tab (1) and
open upper part of the grass catcher
box (2) upwards.
Hold grass catcher box by handles in
upper part of grass catcher box (3) and
in lower part of grass catcher box (4)
and empty it.
12.1 General
Annual service by the specialist dealer:
The lawn mower should be inspected once
annually by a specialist dealer. VIKING
recommends VIKING specialist dealers.
12.2 Cleaning the machine
Maintenance interval:
After each use
Detach grass catcher box (Ö 8.3).
Cleaning position ME 339 C:
Fold down mono handlebar (Ö 8.1).
Lift discharge flap (1), tilt mower
upwards and set down on handlebar
console (2).
Leave handlebar (3) resting on the
ground and fasten in this position with
quick-clamping device (4).
Cleaning position ME 339:
Fold down the dual handlebar (Ö 8.2).
Tilt lawn mower upwards and set down
on lower handlebars (5).
Notes on cleaning:
Clean the machine thoroughly each time it
has been used. Care of the machine will
protect it against damage and extend its
service life.
Do not start the motor in high grass
or when the mower is set to the
lowest cutting height, as this makes
starting difficult.
12
13
14
12. Maintenance
Risk of injury!
Observe the safety instructions in
the section "For your safety" (Ö 4.).
15
16
Risk of injury:
Before tipping up the mower, place
it on firm, level and flat ground. The
machine may tip over when working
on it in the cleaning position.
Always stand to the side of the
machine. Never work in front of or
behind the mower.
17
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking ME 339C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking ME 339C in the language / languages: All languages as an attachment in your email.

The manual is 25,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info