667212
37
Zoom out
Zoom in
Previous page
1/454
Next page
35
DEFRNLITESPTNOSVDAPLSKHUHRCS EN
0478 121 9917 E - EN
Pull or push upper handlebar (4) out
of/into lower handlebar to the desired
handlebar height.
Hold upper handlebar (4) with one hand
and close quick-clamping device (5).
Quick-clamping device (5) must be
sufficiently tightened so that it closes
completely and handlebar is firmly
locked in lower handlebar. If necessary,
release quick-clamping device again
and turn knurled nut (6).
8.2 Dual handlebar (ME 339)
Folding down handlebar:
Transport position (for cleaning, for
space-saving transport and for storage of
the machine):
Loosen rotary handles (1) until they can
be moved easily backwards and
forwards in machined grooves, then
fold down upper handlebar (2)
forwards.
Working position (to push machine):
Fold up upper handlebar (2) rearwards
and hold with one hand.
Tighten rotary handles (1). Ensure
correct position of cable guide (3).
8.3 Grass catcher box
Attaching:
Open discharge flap (1) and hold
it open.
Attach grass catcher box (2) to
mountings (4) on rear of machine by
means of locating lugs (3).
Close discharge flap (1).
Detaching:
Open discharge flap (1) and hold it
open.
Lift grass catcher box (2) and remove
rearwards.
Close discharge flap (1).
8.4 Central cutting height
adjustment
Five different cutting heights
between 30 mm and 70 mm can be set.
Level 1 = lowest cutting height
Level 5 = highest cutting height
Lawn mowers for Great Britain:
Six different cutting heights between
20 mm and 70 mm can be set.
Level S = lowest cutting height
Level 5 = highest cutting height
Setting cutting height:
Push height adjustment lever (1) away
from lawn mower slightly until lever is
released from locating lugs (2).
Increasing cutting height:
Raise lawn mower using height
adjustment lever (1) (push lever
forwards).
Decreasing cutting height:
Lower lawn mower using height
adjustment lever (1) (push lever
rearwards).
Push height adjustment lever (1)
towards lawn mower slightly until
locating lugs (2) engage in lever. The
selected cutting height can be read off
at the front locating lug (3).
9.1 General
To ensure a perfect, thick lawn, mow
regularly and keep the grass short.
Do not cut the lawn too short in hot, dry
conditions as it will dry out or burn in the
sun and become unsightly.
The cutting pattern will be better with a
sharp blade than with a blunt one; the
blade should therefore be sharpened
regularly (VIKING specialist dealer).
Danger of pinching!
The upper handlebar can be fold
down when the rotary handles are
released. For this reason, always
hold the upper handlebar (2) with
one hand at its highest point when
you unscrew the rotary handles.
8
In order to prevent damage, the
lowest cutting height must only be
used on even lawns (without
bumps).
9
10
9. Notes on working with the
machine
Risk of injury!
Untangle any knots in the cable
immediately.
Guide the electric cable behind you
when mowing. Electric cables can
be inadvertently cut when mowing
and present a tripping hazard. They
therefore involve a high accident
risk. For this reason, mow so that
the electric cable is always visible
in the area of grass that has already
been cut.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking ME 339C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking ME 339C in the language / languages: All languages as an attachment in your email.

The manual is 25,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info