667318
44
Zoom out
Zoom in
Previous page
1/234
Next page
0478 111 9925 B - EN
42
Repeat this procedure on all four wheels.
7.4 Height adjustment of the
handlebar
The working height of the handlebar
can be adjusted to 3 levels.
Remove screw (1).
Grip handlebar (2) with both hands,
adjust to a pleasant working height by
moving it upwards or downwards and
hold in position.
Install screw (1) and tighten.
7.5 Fuel and engine oil
Engine oil
Please consult the engine
instruction manual for the type of
engine oil to be used and the oil
capacity.
Avoid exceeding or falling below the
correct oil level.
Screw on the oil tank cap properly before
operating the engine.
Fuel
Use only fresh, environmentally
friendly, good quality fuel:
Unleaded petrol
Please consult the engine
instruction manual for precise details on
the fuel quality/octane rating.
See the section "Technical specifications"
for details about the fuel tank capacity.
(Ö 17.)
Topping up fuel
Open tank ventilation screw (1).
Unscrew tank cap (2).
Top up fuel (use a funnel).
Screw tank cap (1) back on again.
7.6 Assembling the grass
catcher bag
Pull grass catcher bag fabric (C)
over grass catcher bag frame (B) as
shown. The struts (1) and handle (2)
must be located on the outside of the
fabric.
Position integrated plastic sleeves (3)
on the grass catcher bag frame and
press them into place. Start by pressing
under guiding plate (4) of the grass
catcher bag frame.
First attach flap (D) on the left, then on
the right of the grass catcher bag frame,
then snap them in on both sides by
pressing firmly.
7.7 Attaching and detaching the
grass catcher bag
Attaching:
Open discharge flap (1) and hold it
open.
Hold the grass catcher bag at
handle (2) and guide into ejection
chute (4) with guiding plate (3).
Place brackets (5) on mountings (6) on
the left and right between the machine
and handlebar and attach the grass
catcher bag with a gentle tug.
Release discharge flap (1).
Detaching:
Lift discharge flap (1).
Hold grass catcher bag at handle (2)
and detach.
Close discharge flap (1).
Your lawn mower is equipped with a
blade brake clutch (BBC).
This means that the mowing blade stops
within a short time after it is disengaged,
but the engine keeps running.
Avoid damage to the machine!
To prevent the machine tipping
over, set the cutting height on the
rear wheels first and then on the
front wheels.
Caution must also be exercised
when setting a lower cutting height
because the entire weight of the
machine then rests on the last
wheel.
Avoid damage to the machine!
Top up engine oil before starting for
the first time. Use a suitable filling
aid when topping up the engine oil
and when refuelling (e.g. funnel).
7
8
Check the oil filling level at regular
intervals (see engine instruction
manual).
Open tank ventilation screw (1) and
fuel cock (3) before operating the
engine.
9
8. Blade brake clutch (BBC)
10
12
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MB 756 YS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MB 756 YS in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 13,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info