Manual Viking LB 540 (page 32 of 502) (All languages)

667342

Zoom out

Zoom in

1/502

0478 670 9903 C - EN

Working on slopes:

Always work across and back on slopes,

never up and down.

If the user loses control when working up

and down, there is a risk of being run over

by the machine.

Be particularly careful when changing

direction on a slope.

Always ensure good stability on slopes

and avoid mowing on excessively steep

slopes.

For safety reasons, the machine must not

be used on slopes with an inclination of

more than 25° (46.6%). Risk of injury!

A slope inclination of 25° corresponds to a

vertical height increase of 46.6 cm for a

100 cm horizontal distance.

In order to ensure an adequate oil supply

for the engine, the information in the

accompanying engine instruction manual

must be additionally observed when using

the machine on slopes.

Working:

Caution – risk of injury!

Never put hands or feet on or

underneath rotating parts.

Never touch rotating blades.

Always keep away from the discharge

opening. Always observe the safety

distance provided by the handlebar.

Do not try to examine the scarifying unit

while the machine is operating. Never

open the discharge flap and/or remove the

grass catcher box (accessory – not

included in standard equipment) when the

blades are running. Rotating blades can

cause injury.

Do not lean on the machine and always

maintain your balance and firm footing.

Only operate the machine at walking

speed – never run when working with the

machine. Working quickly with the

machine increases the risk of injury due to

stumbling, slipping, etc.

Note that the blades catch on the ground

when scarifying in the lowered position or

when running over bumps. If the blades

are set too low, the scarifier could

accelerate unexpectedly, possibly

resulting in loss of control of the machine.

Always place the scarifying unit in the

transport position before turning it around.

Be particularly careful when turning the

machine around or pulling it towards you.

Risk of stumbling!

Objects hidden in the turf (lawn sprinkler

systems, posts, water valves, foundations,

electrical wires, etc.) must be avoided.

Never run over any such foreign objects.

Use the machine with great care when

working near slopes, terraces, ditches and

embankments. In particular, ensure that

you maintain sufficient distance to such

danger areas.

Beware of the blades running

on for several seconds before

coming to a standstill.

Stop the engine and place the

scarifying unit in the transport

position

– before pushing the scarifier to and from

the area to be worked,

– before pushing the scarifier onto an

area not covered with grass,

– before the machine has to be tilted for

transportation,

– before adjusting the working depth,

– before opening the discharge flap or

removing the grass catcher box (special

accessory – not included in standard

equipment),

– before leaving the scarifier or if the

machine is unattended,

– before re-filling the tank. Allow the

engine to cool down before re-filling the

tank. Fire hazard!

Stop the engine, place the

scarifying unit in the transport

position and detach the spark

plug socket

– before folding down the handlebar,

– before lifting or carrying the machine.

Stop the engine, detach the

spark plug socket and ensure

that the blades have come to a

complete standstill

– before checking, cleaning or working on

the machine,

– before freeing a blocked scarifying unit

or unblocking the discharge chute,

– if there has been a collision with an

obstacle. Inspect the machine for

damage and perform the necessary

repairs before re-starting and using the

machine.

– if the machine vibrates excessively. In

this case the machine must be checked

immediately.

Is there a drawing showing the removal and replacement of blades on a viking LB540.1 Submitted on 28-6-2021 at 18:11
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Viking LB 540 in the language / languages: All languages as an attachment in your email.

The manual is 25,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Viking LB 540 Manual

Product: