Manual Viking LB 540 (page 30 of 502) (All languages)

667342

Zoom out

Zoom in

1/502

0478 670 9903 C - EN

Keep petrol away from sparks,

naked flames, pilot lights, heat

sources, and other ignition

sources. Do not smoke!

Refill the tank out-of-doors and do not

smoke during refilling.

Before refilling the tank, stop the engine

and allow it to cool.

Refilling with petrol must be performed

before the engine is started. When the

engine is running or is hot, the tank cap

must not be removed and the tank must

not be refilled with petrol.

Do not overfill the fuel tank!

To give the fuel room to expand,

never fill the fuel tank past the

lower edge of the filler neck.

Observe the additional

instructions in the engine

instruction manual.

If petrol is spilled, the engine

must only be started after the petrol-

contaminated area has been cleaned. All

attempts at starting must be avoided until

the petrol fumes have dispersed (wipe

dry).

Any spilt fuel must be wiped up

immediately.

Clothing must be changed if it comes into

contact with petrol.

Never store the machine with petrol in the

tank inside a building. The resulting petrol

fumes could come into contact with naked

flames or sparks and could be ignited.

If it is necessary to drain the tank, this must

be done out of doors.

4.3 Clothing and equipment

Always wear sturdy footwear

with high-grip soles when

working. Never work barefoot

or, for example, in sandals.

Always wear safety glasses and

hearing protection when

working. Wear them at all times.

Also always wear sturdy gloves

and tie up and secure long hair

(headscarf, cap, etc.) when

performing maintenance and

cleaning work or when transporting the

machine.

Always wear long trousers and tight-fitting

clothing when operating the machine.

Never wear loose clothes which may

become caught on moving parts (control

levers) – do not wear jewellery, ties or

scarves.

4.4 Transporting the machine

Always wear gloves in order to prevent

injuries due to sharp-edged and hot

components.

Do not transport the machine with the

engine running.

Before transporting the machine

● stop the engine,

● place the scarifying unit in the transport

position,

● allow the blades to come to a standstill

and

● detach the spark plug socket.

Only transport the machine once the

engine has cooled down and with an

empty fuel tank.

Take the weight of the machine into

account and use suitable loading aids

(loading ramps, lifters) if necessary.

Secure the machine and any machine

components being transported (e.g. the

grass catcher box available as an

accessory) on the load floor using

adequately dimensioned fastening

material (belts, ropes, etc.).

Avoid contact with the blades when lifting

and carrying the machine.

Observe the information in the section

"Transport". It describes how to lift and

lash the machine. (Ö 12.1)

When transporting the machine, always

observe regional legislation, especially

regarding load security and the transport

of objects on load floors.

4.5 Before operation

Make sure that only persons who are

familiar with the instruction manual are

permitted to use the machine.

Check the fuel system (particularly visible

parts such as e.g. tank, tank cap, hose

connections) before operating the

machine. In the event of any leaks or

damage, do not start the engine – fire

hazard!

Have the machine repaired by a specialist

dealer prior to operation.

Observe the local regulations regarding

permitted operating times for gardening

power tools with combustion engines.

Is there a drawing showing the removal and replacement of blades on a viking LB540.1 Submitted on 28-6-2021 at 18:11
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Viking LB 540 in the language / languages: All languages as an attachment in your email.

The manual is 25,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Viking LB 540 Manual

Product: