785554
19
Zoom out
Zoom in
Previous page
1/146
Next page
17
EN NL FR DE ES SE IT Appendix
12. Technical Specifications
EasySolar-II GX INVERTER/CHARGER
PowerControl & PowerAssist yes
Transfer switch 32A
Maximum AC input current 32A
Auxiliary output 32A
INVERTER
Input voltage range 38 66V
Output
Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0,1% (1)
Cont. output power at 25°C (3)
3000VA / 2400W
Cont. output power at 40°C / 65°C 2200W / 1700W
Maximum apparent feed-in power 2500VA
Peak power 5500W
Maximum efficiency
95%
Zero load power
11W
Zero load power in AES mode 7 W
Zero load power in Search mode 2W
CHARGER
AC Input
Input voltage range: 187-265 VAC Input frequency: 45 65 Hz
Charge voltage 'absorption' 57,6V
Charge voltage 'float'
55,2V
Storage mode
52,8V
Maximum battery charge current (4) 35A
Battery temperature sensor
Yes
Programmable relay (5) Yes
Protection (2)
a - g
VE.Bus communication port
For parallel and three phase operation, remote monitoring and system integration
General purpose com. port Yes, 2x
SMARTSOLAR MPPT 250/70-Tr
Model SmartSolar MPPT 250/70-Tr
Maximum output current
70A
Maximum PV power
4000W
Maximum PV open circuit voltage 250V
Maximum efficiency 98%
Self-consumption 20mA
Charge voltage 'absorption', default
57,6V
Charge voltage 'float', default setting
55,2V
Protection (2) a-e
GENERAL
Interfaces BMS-Can port (VE.Can not supported), USB, Ethernet, VE.Direct, Wi-Fi
Remote on-off Yes
Operating temp. range -40 to +65°C (fan assisted cooling)
Humidity (non-condensing): max 95%
ENCLOSURE
Material & Colour
Steel, blue RAL 5012
Protection category
IP21
Battery-connection M8 bolts
PV connection M6 bolts
230 V AC-connection Screw terminals 13 mm2 (6 AWG)
Weight
26kg
Dimensions (hxwxd)
506 x 275 x 147 mm
STANDARDS
Safety
EN-IEC 60335-1, EN-IEC 60335-2-29
Emission / Immunity
EN 55014-1, EN 55014-2
EN-IEC 61000-3-2, EN-IEC 61000-3-3
IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Anti-islanding See our website
1) Can be adjusted to 60 Hz
2) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) 230 VAC on inverter output
g) input voltage ripple too high
3) Non-linear load, crest factor 3:1
4) At 25°C ambient
5) Programmable relay which can be set for general alarm, DC under voltage or genset start/stop function.
AC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron EasySolar-II 48 3000 35-32 MPPT 250 70 GX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron EasySolar-II 48 3000 35-32 MPPT 250 70 GX in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 2.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info