785457
22
Zoom out
Zoom in
Previous page
1/27
Next page
Last update: 2018-08-21 10:10 ccgx:start https://www.victronenergy.com/live/ccgx:start
https://www.victronenergy.com/live/ Printed on 2018-08-21 11:59
Configuration:
Connect the battery communications cable to the CCGX according to the instructions.1.
In the CCGX, in Settings → System setup, verify that the selected Battery Monitor is the battery.2.
Note that the Battery Monitor setting in VEConfigure3 is irrelevant. For systems like this, changing this
setting will have no effect on the charge or any other parameters in this type of system.
Other system types
When there are more chargers, or loads, connected to the battery than just the Multi or MPPT Solar
Chargers, a dedicated Battery Monitor will be required. Examples are:
House loads in Marine or Vehicle system.
PWM Solar Chargers
AC chargers, such as Skylla-is, Phoenix chargers, non Victron chargers, etc.
Alternators
DC-DC chargers
Wind turbines
Hydro turbines
Configuration:
Configure all BMV parameters (see BMV documentation)1.
In the CCGX, in Settings → System setup, verify the selected Battery Monitor. It should be the2.
BMV Battery Monitor.
Note that the Battery Monitor setting in VEConfigure3 is irrelevant. For systems like this, changing this
setting will have no effect on the charge - or any other parameters - in this type of system.
2.4.2 Notes
Note that this is all about showing an accurate state of charge to the user, rather than being
required for an efficient system. The SOC percentage is not used for normal battery charging. It
is, however, required when a genset needs to be started and stopped automatically based on
battery SOC.
For hub-2 installations we recommend you do not add a BMV to the system as it will only
confuse the user when there are two SOCs with different readings being displayed.
More information:
VRM Portal FAQ - difference between BMV SOC and VE.Bus SOC
CCGX Manual - configurable parameters. See Battery Monitor selection and Has DC System.
2.4.3 Selecting SOC source
(Settings → System Setup → Battery monitor)
In the image below you can see a range of selectable choices for the SOC values which are shown in
the main Overview screen. Choose the source you want to see on the main Overview screen of your
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Color Control GX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Color Control GX in the language / languages: English as an attachment in your email.

The manual is 0.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info