661546
67
Zoom out
Zoom in
Previous page
1/80
Next page
Battery charger / inverter COMBI-GAMMA
090138.02 67
(E2-13) setting.
E2-14: No Low Batt. Alarm Select (When E2-15=0, ignore this setting)
E2-15: No Low Batt Alarm for ? sec
If you want to switch off the Aux-Relay 1 when there is no low battery alarm, this setting •
(E2-14) can be used to choose between pre-alarm or normal alarm.
As with other Aux-Relay 1 setting, a delay must be specified also. This can be done with •
the Delay value for set Aux-Relay 1 OFF when No Low Battery Alarm (E2-15) setting.
E2-16: No OverLoad Alarm Select (When E2-17=0, ignore this setting)
E2-17: No OverLoad Alarm for ? sec
If you want to switch off the Aux-Relay 1 when there is no OverLoad alarm, this setting •
(E2-16) can be used to choose between pre-alarm or normal alarm.
As with other Aux-Relay 1 setting, a delay must be specified also. This can be done with •
the Delay value for set Aux-Relay 1 OFF when No OverLoad Alarm (E2-17) setting.
E2-18: No Udc Ripple Alarm Select (When E2-19=0, ignore this setting)
E2-19: No Udc Ripple Alarm for ? sec
If you want to switch off the Aux-Relay 1 when there is no battery voltage ripple alarm, •
this setting (E2-18) can be used to choose between pre-alarm or normal alarm.
As with other Aux-Relay 1 setting, a delay must be specified also. This can be done with the •
Delay value for set Aux-Relay 1 OFF when No Battery voltage Ripple Alarm (E2-19) setting.
E3 Group (Setting Aux-Relay 2 ON Condition)
E4 Group (Setting Aux-Relay 2 OFF Condition)
E5 Group (Setting Aux-Relay 3 ON Condition)
E6 Group (Setting Aux-Relay 3 OFF Condition)
Note: The functions and the settings of E3, E4, E5 and E6 Groups are exactly the same *
as those of E1 and E2 Group so please refer to above E1 and E2 Group description
and setting for E3, E4, E5 and E6 Groups.
E7 Group (Aux-Relay 1 Option)
E7-01: Aux-Relay 1 Usage Select
Setting Function
E7-01=0
(Initial setting)
Auxiliary Relay 1 is not allowed to be active (Idle).
E7-01=1 Auxiliary Relay 1 is allowed to be active.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vetus COMBI1512 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vetus COMBI1512 in the language / languages: English as an attachment in your email.

The manual is 4,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vetus COMBI1512

Vetus COMBI1512 Usermanual and installation guide - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info