574309
35
Zoom out
Zoom in
Previous page
1/52
Next page
EVX-530 SEriES OpErating Manual
33
When using the MDC1200 System
This feature, if enabled, Press, (or press and hold),
the assigned
PF
key to send an MDC1200 code.
Available codes are CALL ALT”, SEL CALL,
RADIO CK”, “STUN” and “RIVIVE”.
r
Press, (or press and hold), the assigned
PF
key to
enter the “Call Menu” mode.
r
Press the
SIDE-1
/
SIDE-2
buttons to select the
desired Call mode, then press the
[
D
]
key to ac-
cept the selection. (You may cancel the selection
by pressing the
[
C
]
key).
r
Press the
SIDE-1
/
SIDE-2
buttons to select the
station to be called.
Note: You may enter the station’s ID number (four
digits) directly from the keypad
([
0
]
-
[
9
]
,
[
A
]
-
[
D
]
,
[
#
]
: substitute for “E”, and
[
Ý
]
: wild card
)
.
r
Press the
PTT
switch to send an MDC1200 call.
When operating in the Digital mode
This feature, if enabled, allows the user conrm and/
or edit the Contact Alias.
r
Press, (or press and hold), the assigned PF key to
enter the “Call Menu” mode.
r
Press the
SIDE-1
/
SIDE-2
buttons (or
[
A
]
/
[
B
]
keys) to select the desired Contact Alias. You may
adVanced operatIon
nd the “New List” and “Manual” category at the
last of the indication loop. Describes these two
functions later.
r
Press the
[
D
]
key to accept the selection.
You may cancel the selection by pressing the
[
C
]
key.
I
)
If the TX ID Type of the selected Contact Alias is
“Group Call or “All Call” (indicates the
GC
or
AC
icon at the upper right corner of the display),
you may conrm the Call ID of the Contact Alias by
the following operation:
Press the
[
D
]
key to conrm the “Call ID” of the
selected Contact Alias.
Press the
[
C
]
key to return the display to the “Tag
Name” indication.
II
)
If the TX ID Type of the selected Contact Alias is
“Private Call” (indicates the
PC
icon at the upper
right corner of the display), you may conrm and edit
the Contact Alias by the following operation:
Press the
SIDE-1
/
SIDE-2
buttons (or
[
A
]
/
[
B
]
keys) to select the function you wish to. Avail-
able selections are CALL ALT”, VIEW ID”,
EDIT TAG
ø
”, “EDIT ID
ø
”, “ALT SEL”, “DEL
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vertex Standard EVX-531 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vertex Standard EVX-531 in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info