574309
34
Zoom out
Zoom in
Previous page
1/52
Next page
EVX-530 SEriES OpErating Manual
32
speed dIal
Your Vertex Standard dealer may have pre-pro-
grammed Auto-Dial telephone number memories into
your radio.
To dial a number:
In the
EVX-531/-534
, press, (or press and hold), the
assigned
PF
key, then press the
SIDE-1
/
SIDE-2
but-
tons (or
[
A
]
/
[
B
]
keys) to select the Auto-Dial memory
number you wish to dial. Press the
PTT
switch to
send a pre-defined DTMF tone. The DTMF tones
sent during the dialing sequence will be heard in the
speaker.
In the
EVX-539
, press, (or press and hold), the as-
signed
PF
key, then press the keypad
([
0
]
-
[
9
]
key
)
corresponding to the Auto-Dial memory number you
wish to dial. The
EVX-539
send a pre-dened DTMF
tone, and the DTMF tones sent during the dialing se-
quence will be heard in the speaker.
dtmf code set
(
eVx-539
)
r
Press, (or press and hold), the assigned
PF
key to
start entering the DTMF dialing sequence.
r
Enter the DTMF digit directly from the keypad
([
0
]
-
[
9
]
key
)
.
r
After entering all DTMF digits, press the
PTT
switch to transmit the DTMF code.
call
(
eVx-531
)
Press, (or press and hold), the assigned
PF
key to
send a 2-tone/5-tone sequential tone.
call
(
eVx-534 & eVx-539
)
The Call feature of the
EVX-534/-539
is different by
the operating system and operating mode.
When using the DTMF Paging System
(
eVx-539
)
This feature, if enabled, allows the user to send any
3-digit Page Call code, used to call other similarly-
equipped stations. Press, (or press and hold), the as-
signed
PF
key, followed by the three digits represent-
ing the Page Call code of the station you wish to call.
Three tones will be heard after the last key is pressed
(the new code will now be transmitted).
The receiver squelch of the other station will be
opened, and you can begin communication.
When using the 2-tone/5-tone Signaling System
This feature, if enabled, Press, (or press and hold), the
assigned
PF
key to send a 2-tone/5-tone sequential
tone.
adVanced operatIon
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vertex Standard EVX-531 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vertex Standard EVX-531 in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info