574309

Vertex Standard EVX-531 Manual

33
Zoom out
Zoom in
Previous page
1/52
Next page
EVX-530 SEriES OpErating Manual
31
talK around
(
ta
)
Press, (or press and hold), the assigned
PF
key to
activate the Talk Around feature when you are op-
erating on duplex channel systems (separate receive
and transmit frequencies, utilizing a “repeater” sta-
tion). The Talk Around feature allows you to bypass
the repeater station and talk directly to a station that
is nearby. This feature has no effect when you are
operating on “simplex” channels, where the receive
and transmit frequencies are already the same. In the
EVX-534/-539
, when the Talk Around feature is ac-
tivated, the “ ” icon will be indicated on the display.
Note that your dealer may have mode provision for
“Talk Around” channels by programming “repeater”
and “Talk Around” frequencies on two adjacent chan-
nels. If so, the key may be used for one of the other
Pre-Programmed Functions.
Note: The Talk Around feature does not activate on
the Simplex Channel.
reset
Press (or press and hold) the assigned
PF
key to reset
the RFC (Ready for Communication) condition.
call 1 to call 3
(
eVx-531
)
call 1 to call 5
(
eVx-534 & eVx-539
)
Press, (or press and hold), the assigned
PF
key to
send a pre-programmed call signal of the 2-Tone,
5-Tone, MDC1200
®
or Digital Call.
code up/doWn
(
eVx-534 & eVx-539
)
Press, (or press and hold), the assigned
PF
key to
select a 2-Tone or 5-Tone encode code from the pre-
programmed encode list.
code set
(
eVx-534 & eVx-539
)
You can change the desired digit of the 5-Tone en-
code code using this function:
r
Press, (or press and hold), the assigned
PF
key.
r
Enter the desired 5-Tone encode code directly
from the keypad
([
0
]
-
[
9
]
key
)
.
r
Press the
[
D
]
key to store the new setting. The
display indicates “- SET -” briey, then reverts to
the normal channel indication.
You may cancel the new setting by pressing
the
[
C
]
key. In this case, the display indicates
“- CANCEL -” briey.
adVanced operatIon
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vertex Standard EVX-531 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vertex Standard EVX-531 in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info