815507
39
Zoom out
Zoom in
Previous page
1/56
Next page
3939 3-90-30007498Vermont Castings • Radiance RADVT Installation Manual_R32 • 10/23
N. Burner, Pilot & Control Compartment
Keep the control compartment, stones and burner areas
surrounding the stones clean by vacuuming or brushing at
least twice a year. Make sure the burner porting, pilot air
opening and burner air opening are free of obstructions at
all times.
Pilot Flame
The ames from the pilot should be visually checked as
soon as the heater is installed and periodically during normal
operation. The pilot ame must always be present when the
stove is in operation, Figure 4.6. The pilot ame has three
distinct ames, one engulng the sensor, one engulng the
thermopile, and the other reaching to the main burner.
WARNING
!
Turn o󰀨 gas before servicing stove. It is recommended that
a qualied service technician perform these check-ups at
the beginning of each heating season
Figure 4.6 - Correct pilot and burner ame appearance.
RADVT MODELS
RADVT-IFT
LG490
all logs
6/07
CO105d
Pilot flame
6/07 djt
Burner
Inspect area around the injector. Remove any lint or foreign
material with a brush or vacuum.
Burner Flame
The ames from the burner should be visually checked as
soon as the heater is installed and periodically during normal
operation. In normal operation, at full rate, and after operating
for about 15 to 30 minutes, the ame should be yellow.
If the ame is blue and candle-like in appearance, adjust
glass or add more glass over ports.
NOTE:Thetypeofinstallation,ventsystemconguration,
andwinde󰀨ectsmaycausetheamepatternstovary.
Air shutter
Air shutter settings should be adjusted by a qualied service
technician at the time of installation. The air shutter is set
at the factory for minimum vertical run. Adjusting air shutter
may be desired for longer vent runs. See Figure 4.7.
NOTICE: If sooting occurs, provide more air by opening the
air shutter.
Figure 4.7 - Air shutter
Air Shutter
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermont Castings Radiance Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermont Castings Radiance Series in the language / languages: English as an attachment in your email.

The manual is 6.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vermont Castings Radiance Series

Vermont Castings Radiance Series User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info