Manual Veripart VPTMVR85 (page 50 of 116) (English, German, Dutch, French)

806448

Zoom out

Zoom in

1/116

Note!

•Once the freezer is in use, it is better to use it continuously; and under

normal circumstances. Do not frequently stop or start its use, so as not

to affect the service life.

Defrosting

After a period of use, a thin layer of frost will form on the freezer

compartment’s inner wall (or evaporator) surface, which may affect

freezerration if the frost layer exceeds 5mm in thickness. In such cases,

gently scrape the frost off using an ice scraper rather than any sharp, metal

implements. Frost should be scraped off every 3 months or so, but if the

normal use of drawers and normal access to food are affected by frost

build-up, make sure to remove the frost in a timely manner.

1. Adjust the thermostat knob to the high mode an hour in advance, so that

food is fully frozen (do not store new food during this time!). Restore the

temperature mode to the original setting when the power supply returns

to normal.

2. You can also make a block of ice using a watertight container and put

it in the upper part of the freezer, so as to extend the storage time of the

food inside.

1. Remove any frozen food, shut off the mains power supply, open the

freezer door, and gently scrape any frost from the inner wall using

an ice scraper. To speed up the thawing process, you can place a

bowl of hot water inside the freezer, and once the iced-over frost

becomes loose, use an ice scraper to scrape it off and remove it.

2. After defrosting, clean the inside of the freezer and switch on the

power supply.

Safety-check after maintenance

Follow the steps below to remove frost build-up:

• Is the power cord broken or damaged?

• Is the power plug rmly inserted into the socket?

• Is the power plug abnormally overheat?

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Veripart VPTMVR85 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Veripart VPTMVR85 Manual

Product: