Manual Velleman HAM982K (page 4 of 52) (English, German, Dutch, French, Spanish)

585216

Zoom out

Zoom in

1/52

HAM982K 4 VELLEMAN

SOUND MEANING

1 short beep successful key entry

2 short beeps successful code entry for the function

5 short beeps

•

wrong code

•

unauthorized command attempted

•

code entry time expired, 10s max. per digit is allowed

1 long beep exit delay expired, system is armed

1 short beep/30s

•

AC power failure

•

weak battery

continuous beep every 0.5s

•

exit delay time

•

entry delay time

•

DAP jumper is on

2 beeps + 5 beeps system cannot be armed instantly due to ARM PROHIBITED

b. Connections

BATTERY: connect the red (+) wire to the positive and the black (-) wire to the negative terminal of the battery. The

battery should be of the 12V / 1.2Ah sealed lead acid rechargeable type. It is protected by a 2.5A resettable

fuse and is charged by a current limiting regulated voltage source in the system.

1, 2 the device requires a 16.5Vac power supply, min. 1.5A at 50 or 60 Hz. The primary side of the transformer

must be connected to an unswitched receptacle.

3 This terminal provides an unswitched +12V output power referring to the common ground. It gives continuous

output power, even if the device is unarmed. Suitable for e.g. smoke detectors, control keypads etc. This

terminal is equipped with a 750mA resettable fuse.

4 This terminal provides a switched +12V output power referring to the common ground when the system is

armed. It is provided for devices that require switched power for resetting, such as glass-break detectors and

smoke detectors that require a power-down to reset. This terminal is equipped with a 750mA resettable fuse.

3+4 These terminals share the same power bus. Combined power for these outputs should not exceed 750mA.

5 Common ground (-)

6 This terminal provides a continuous +12V output power at normal (= no alarm) condition that is switched off

when an alarm occurs. It is intended for alarm devices with a built-in battery that remain quiet as long as there

is an incoming voltage (hold-off voltage) and that are activated (on battery power) when the voltage is cut.

7 This terminal provides a continuous +12V output power upon and after an alarm condition until the system is

disarmed or reset by the user code. It is equipped with a 2.5A resettable fuse. This output is intended for alarm

devices that switch on when there is incoming power (e.g.: SV/PSL3x siren + strobe).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Velleman HAM982K in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Velleman HAM982K Manual

Product: