622303

Velleman DVM9912 Manual

8
Zoom out
Zoom in
Previous page
1/53
Next page
DVM9912 VELLEMAN
8
DIODE CHECK
1. Set the function switch to the position.
2. The symbol will appear on the screen.
3. Insert the black test lead banana plug into the negative (-) jack (COM) and the red test lead banana plug
into the positive (+) jack (Ω).
4. Touch the test probe tips to the diode or semiconductor junction you wish to test. Write down the meter
reading.
5. Reverse the probe polarity by switching probe position. Write down this reading.
6. The diode or junction can be evaluated as follows:
A. If one reading shows a value and the other reading shows OL, the diode is good.
B. If both readings show OL, the device is open.
C. If both readings are very low or 0, the device is shorted.
NOTE: The value indicated on the display during the diode check is the forward voltage.
FREQUENCY MEASUREMENT
1. Set the function switch to the Hz% position.
2. Insert the black test lead banana plug into the negative (-) jack (COM) and the red test lead banana plug
into the positive (+) jack (F).
3. Touch the test probe tips to the circuit under test.
4. Read the frequency on the display. The digital reading will indicate the proper decimal point, symbols (Hz,
kHz) and value.
CAPACITANCE MEASUREMENTS
1. Set the function switch to the CAP position (“nF” and a low value will appear in the display).
2. Insert the black test lead banana plug into the negative (-) jack (COM) and the red test lead banana plug
into the positive (+) jack (CAP).
Touch the test leads to the capacitor to be tested. The display will indicate the proper decimal point, value
and symbol.
TEMPERATURE MEASUREMENTS
1. If you wish to measure temperature in
o
F, set the function switch to the
o
F range. If you wish to measure
temperature in
o
C, set the function switch to the
o
C range.
2. Insert the type K thermocouple probe black test lead banana plug into the negative COM jack and the red
test lead banana plug into the positive TEMP jack.
3. Touch the temperature probe head to the part of which you wish to measure the temperature. Keep
touching the part under test until the reading stabilises (about 30 seconds).
Read the temperature on the display. The digital reading will indicate the proper decimal point and value.
WARNING:
To avoid electric shock, do not test any diode that has voltage on it
.
WARNING:
To avoid
electric shock, disconnect power to the unit under test and discharge all
capacitors before taking any capacitance measurements. Remove the batteries and unplug
the line cords.
WARNING:
To
avoid electric shock, disconnect both test probes from any source
of voltage before
carrying out a temperature measurement
.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velleman DVM9912 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velleman DVM9912 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info