622303
9
Zoom out
Zoom in
Previous page
1/53
Next page
DVM9912 VELLEMAN
9
BATTERY REPLACEMENT
1. When the batteries are exhausted or drop below the operating voltage, “BAT” will appear in the right-hand
side of the LCD display. The battery should be replaced.
2. Follow instructions for installing a battery. See the battery installation section of this manual.
3. Dispose of the old battery properly.
BATTERY INSTALLATION
1. Disconnect the test leads from the meter.
2. Open the battery door by loosening the screw using a Phillips head screwdriver.
3. Insert the battery into battery holder, observing the correct polarity.
4. Put the battery door back in place. Secure with the two screws.
NOTE: If your meter does not work properly, check the fuses and battery to make sure that they are still in
good operating condition and that they are properly inserted.
REPLACING THE FUSES
1. Disconnect the test leads from the meter and any item under test.
2. Open the fuse door by loosening the screw on the door using a Phillips head screwdriver.
3. Remove the old fuse from its holder by gently pulling it out.
4. Install the new fuse into the holder.
5. Always use a fuse of the proper size and value (0.5A/250V fast blow for the 400mA range, 10A/250V fast
blow for the 10A range).
Put the fuse door back in place. Insert the screw and tighten it securely.
WARNING: To avoid electric shock, do not operate your meter until the fuse door is in place and fastened
securely.
WARNING
: To avoid electric shock, disconnect the test leads from any source of voltage before
removing the battery door
.
WARNING:
To avoid electric shock, do not operate your meter until the batte
ry door is in place and
fastened securely
.
WARNING
: To avoid electric shock, disconnect the test leads from any source of voltage before
removing the battery door.
WARNING:
To avoid electric shock, do not operate your meter until the battery door is in p
lace and
fastened securely
.
WARNING
: To avoid electric shock, disconnect the test leads from any source of voltage before
removing the fuse door
.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velleman DVM9912 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velleman DVM9912 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info