622293

Velleman DVM601 Manual

8
Zoom out
Zoom in
Previous page
1/50
Next page
DVM601
22/08/2013 ©2008 Velleman
®
Components nv
8
• For continuity tests, connect the test leads to two points of the circuit to
be tested. If continuity exists (resistance < 50Ω), the built-in buzzer will
sound. If the circuit is open, “OL” will be indicated.
Non-contact AC voltage test
• Set the rotary switch [3] to any position (except OFF).
• The AC-sensor is located at the top of the meter, near the light sensor
[9]. Point the AC-sensor towards the suspected AC-source. When AC
voltage is present, the indicator [16] will light up. The stronger the AC-
source, the more the indicator [16] will be lit.
7. Battery
• When the low battery indication ( ) appears, replace the internal
batteries. Turn the rotary switch [3] to the OFF-position.
• Always disconnect test leads when replacing the battery. Do not us the
device without batteries installed.
• The battery cover is located on the back of the device and is closed with two
screws. Remove the screws and open the battery compartment.
• Remove the battery and insert a new 9V (E-block) battery following the
polarity as indicated in the battery holder.
• Reinstall the cover and secure it with the two screws.
•
Remove the battery when the device is not in use for a longer period of time to
avoid leakage.
• Do not attempt to recharge non-rechargeable batteries, do not puncture and do
not throw in fire as they may explode.
WARNING: handle batteries with care, observe warnings on
battery casing. Dispose of batteries in accordance with local
regulations.
Keep batteries away from children.
8. Fuses
• To replace an internal fuse, turn the rotary switch [3] to the OFF-position.
• Always disconnect test leads when replacing fuses. Do not use the device
without the proper fuses installed.
• The access the fuses, the whole back cover must be removed. Loosen the 6
outer screws (2 are located under the foldable stand). Do not remove the
battery cover screws (see §7). Lift the whole back cover. Do not touch the
electronic circuitry inside.
• Replace fuses only by new ones with following specifications:
• Fuse 1 (large): F 10A/600V fast blow
• Fuse 2 (small): F 500mA/660V fast blow
Using wrong fuses or short-circuiting fuse holders can lead to
potentially life-threatening situations.
• Close the back cover and secure the 6 screws.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velleman DVM601 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velleman DVM601 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info