622291
13
Zoom out
Zoom in
Previous page
1/67
Next page
For measurements up to 600mA: connect the red test lead to the "µAmA" jack
and the black lead to the "COM" jack.
For measurements up to 10A: connect the red test lead to the "10A" jack and
the black lead to the "COM" jack.
Set the rotary switch to the µA range for measurements up to 600µA (only when
test probe is connected to the µAmA jack).
Set the rotary switch to the mA range for measurements up to 600mA (only when
test probe is connected to the µAmA jack).
Set the rotary switch to the A range for measurements up to 10A (only when test
probe is connected to the 10A jack).
Press the SELECT button to select DC current (DCA) or AC current (ACA) mode.
Connect the test probes in series with the circuit.
Read the measured value from the display.
Notes:
o for DC-current measurements, when a negative polarity is present at the red
test lead, the indicated value is preceded by a “-” sign.
o The µAmA-range is protected against over current with a F630mA 1000V fuse,
the 10A-range is protected against over current with a F10A 1000V fuse.
8. Maintenance
Do not replace internal parts yourself. Replace damaged or lost accessories
by identical ones with the same specifications. Order spare accessories e.g.
test probes at your dealer.
a. General maintenance
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or
solvents.
b. Fuse Replacement
Switch off the multi-meter, disconnect the test leads from the test points
and remove the test leads from the measuring jacks before replacing the
batteries or fuses.
Refer to the illustration on pages 3 of this manual.
Remove the 4 screws at the back (indicated with in the illustration) and gently
open the meter.
Remove the screw that holds the PCB in place (indicated with in the
illustration) and gently lift the PCB.
Remove the fuse from the fuse holder and replace it with a new fuse of the same
type and with the same specifications (F630mA/1000V - Ø10.3x38mm,
F10A/1000V - Ø10.3x38mm).
Close the meter meticoulsly.
c. Battery Replacement
To avoid false readings, which could lead to possible electric
shocks or personal injury, replace the battery as soon as the
battery indicator appears.
Switch off the multi-meter, disconnect the test leads from the test
points and remove the test leads from the measuring jacks before
replacing the batteries or fuses.
Refer to the illustration on pages 3 of this manual.
Remove the 2 screws at the back of the meter (indicated with in the
illustration) and gently open the battery compartment.
Replace the battery (9V 6LF22). Do not use rechargeable batteries. Insert
following the right polarity.
Close the battery compartment and reseat the screws.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velleman DVM4100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velleman DVM4100 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info