162090
22
Zoom out
Zoom in
Previous page
1/30
Next page
Troubleshooting
In very rare cases, it can happen that your
multimedia system does not function as you
would expect. Before you contact customer
service, please read the detailed operating
instructions on the DVD-ROM and review the
following checklist, as an apparent malfunc-
tion can possibly be remedied quickly.
Symptoms Possible cause/remedy
System does not start, screen dark. Ignition switched off:
Switch on the ignition.
Ignition is already switched on, and system is on stand-by:
Press one of the cursor buttons, the OK button, or the menu button
on the remote control.
The system switches itself off after a
period of normal operation.
At extremely high or low temperatures, the system is automatically
switched off to protect against damage. It switches on again as soon
as the temperature has returned to normal.
System does not react to actuation of
the buttons if remote control is not in
its active holder.
No batteries inserted or batteries empty:
Replace the batteries in the remote control, or install the remote
control in its holder.
Guidance information not audible. Check whether “Audible information” has been activated in the
“Settings” menu.
Check whether “Volume” in the “Settings” menu is set to minimum.
If no external speaker is connected:
Check the volume setting of the monitor.
Some of the symbols or specifications
shown in the operating instructions are
not displayed in the status line.
Activate the required specifications in the “Settings
–> Screen config. –> Status line” menu.
Colour of the satellite symbol in the
status line is constantly red.
No GPS reception.
Ensure that the GPS antenna is not obscured by any objects.
Current time in the status line is incor-
rect.
Set the correct time zone in the “Settings –> General settings –>
Measuring units” menu.
Guidance is not accurate. An accuracy of 50 m falls within the specified tolerance limits. Please
contact an authorised dealer if greater inaccuracies occur repeatedly.
Displayed position does not correspond
to actual vehicle position.
Problems with GPS reception persist. The position is corrected auto-
matically as soon as GPS reception is satisfactory.
If necessary, wait a few minutes.
Have your installation workshop verify that the mounting angle of
the navigation computer has been set correctly.
Directions do not correspond to the ac-
tual traffic conditions.
It is possible that the car’s position as calculated by the navigation
system is not currently correct. Traffic routing may have been
changed and no longer corresponds to the information on the navi-
gation data medium.
“TMC” logo in the status line is perma-
nently red, and no traffic information
is displayed on the map.
Poor/disrupted TMC reception.
24
OPERATION SETUP INSTALLATIONCONTENTS
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO Dayton pc 5200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO Dayton pc 5200 in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info