162090
21
Zoom out
Zoom in
Previous page
1/30
Next page
General settings
The following options are available in the
“General settings” menu:
Language
Selection of the language for menus and
voice information.
The language for menus can be set in-
dependently of the language for navi-
gation instructions.
An SD card with the corresponding lan-
guage files is needed for loading a lan-
guage other than the two language
files displayed.
The language files can be transferred
from the supplied DVD-ROM to an SD
card using the PC Copy Tool.
Audible settings.
Settings for the audible guidance messages:
SDVC: Adjustment for speed-dependent
volume increase.
Volume: Setting of the volume of the
guidance messages.
Voice on/off: Activates/deactivates the
audible guidance messages.
Measuring units
Setting of time and date format, measuring
units for distance specifications and adjust-
ment of the current time zone.
Device configuration
Connection settings which have to be carried
out once when the system is installed and/or
in the case of subsequent system upgrades.
Shut-down timer
Setting of the after-running time for the
navigation computer (sensible e.g. for short
intermediate stops).
System information
The following options are available in the
“System information” menu:
Diagnosis: Code-protected menu for in-
stallation and service purposes.
Default settings: Resets the user-specific
settings to the factory values.
Configuration: Display of unit identifica-
tion and hardware and software versions.
Speed correction: The navigation system
uses an average cruising speed to calcu-
late the remaining travel time and the
estimated time of arrival. If required,
you can adapt this speed to your actual
average speed. However, we do not rec-
ommend you deviate significantly from
the standard value of 100 %.
Info points
Selection and activation/deactivation of the
messages concerning info points (e.g. tourist
attractions, petrol stations, etc.).
23
OPERATION SETUP INSTALLATIONCONTENTS
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO Dayton pc 5200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO Dayton pc 5200 in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info