162090

VDO Dayton pc 5200 Manual

13
Zoom out
Zoom in
Previous page
1/30
Next page
TMC traffic information
Your navigation system receives traffic infor-
mation via its integrated Dynamic TMC Re-
ceiver, which is then used for the dynamic
route planning.
You can also collect information about the
current traffic situation, either as a text mes-
sage or in the map display.
To be able to use this TMC information, the
following prerequisites must be fulfilled:
❑ The TMC data are supported by the
selected database on the navigation
SD card in this region.
❑ TMC traffic information is broadcast in
this region.
❑ You have activated any TMC messages
which you would like to have displayed
or taken into account under “Message
selection” in the “Info” or “Settings”
menu.
You can see the TMC status in the status line
on the screen*:
❑ “TMC” green: TMC information is avail-
able. Alternatively, the name of the pro-
vider (TMC provider) may be displayed.
❑ “TMC” black: No TMC data for the region
available on the inserted navigation SD
card.
❑ “TMC” red: TMC reception distorted/no
TMC transmitter set.
* The display of “TMC” must be activated in
the status line. Refer to the “Settings” section,
page 21.
■ TMC products subject to a fee
(Pay TMC)*
In some countries or regions, extended TMC
information might be available for an addi-
tional charge.
✎
Pay TMC stations are generally identified
by a coin in the TMC station list.
* These TMC services subject to a fee are
only supported by the Pay-TMC version of
the navigation system.
Display of road obstructions
■ In the status line
In the top right status line, the system displays
whether there are any road obstructions on
the planned route.
❑ “T” red: Road obstructions on the
planned route that would cause a se-
vere delay.
❑ “T” green: Less than 50 km to the
road obstruction on the planned route.
It is possible to plan a detour using the
“Local detour” function (available only
with dynamic route planning deacti-
vated).
❑ “T” orange: Accepted or avoided
traffic jams on the original route (with
dynamic route planning activated).
15
OPERATION SETUP INSTALLATIONCONTENTS
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO Dayton pc 5200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO Dayton pc 5200 in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info