39914
9
Zoom out
Zoom in
Previous page
1/69
Next page
10
TROUBLE SHOOTING
There may be times when you suspect that your
car radio is not functioning as you would expect it
to. Before calling for service, please read the
operating / installation instructions and review the
following checklists. You may find that an apparent
malfunction can easily be rectified.
If you still have to send your set for service, always
send the complete set. Do not try to open the set
to service it yourself.
Audio
Set does not function. No Display.
Check fuse (set and car) and connections.
Set functions but no sound?
Adjust the volume of the set.
Check fader and balance settings.
Check aerial and its connection.
The sound from the speakers is reduced
automatically.
A built-in safety circuit prevents the temperature
in the set from exceeding a certain level.
Wait for the temperature to decrease before
increasing the volume.
Radio
Cannot tune to desired station?
Check that the aerial is fully extended and
properly connected.
Check that the negative terminal (brown lead)
is connected to earth (car chassis).
Desired station is too weak, try Manual Tuning.
Poor tuner reception?
In some cars (e.g. VW and Seat) there is an
active aerial on the roof that needs a 12 Volt
supply. Please ask your dealer to check
whether a 12 volt is supplied to the antenna.
Display shows frequency (not station name).
Set is tuned to non-RDS station.
Radio mutes momentarily while display shows
'SEARCH' and station name/frequency
alternately.
Set is checking a list of Alternative Frequencies
(AF) for the tuned radio station as reception is
weak. In case no AF is transmitted for the tuned
station, switch off AF via the 'SETUP'.
Display shows 'NO TA', and set beeps at intervals.
The tuned station becomes too weak to enable
the reception of Traffic Announcements. Use
search tuning to find another station.
If the TA mode is switched on, search tuning
only selects stations which enable the reception
of Traffic Announcements.
Cassette
Display shows 'ERROR'.
Check cassette for faults
Cassette playback lacks high-notes or loss of
one channel.
Clean cassette player tape head.
Tape Slack
Check and make sure any slack in the tape is
taken up before inserting the tape into the unit.
A loose tape can get caught in the mechanism
and cause damage to the unit and tape itself.
Tighten the tape by using a pencil or a similar
instrument into the spindle hole and turn until all
slack has been taken up.
01-FF.p65 7/10/2001, 3:00 PM10
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO Dayton CD 441 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO Dayton CD 441 in the language / languages: Dutch as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info