702173
7
Zoom out
Zoom in
Previous page
1/11
Next page
Cleaning the separator
Twist the post-motor
lter cover anti clockwise
and remove.
Check the post-motor lter
for any discolouration.
Lift and remove the
post-motor lter.
Lift the dirt container lid
release clip. In a hinge
like manor lift the dirt
container lid.
Pull the pre-motor lter
tab and remove the lter
from the dirt container.
Lift and remove separator
out of dirt container. Using a
soft brush remove any dirt/
debris from separator.
Re t the separator making
sure the semi circular tab
on the separator ts into
the groove on the
dirt container.
Press the dirt container
release buttons located the
side of the carry handle.
Lift the dirt container lid
release clip. In a hinge
like manor lift the dirt
container lid.
Tap the lter over a bin
to remove any dirt/debris.
Wash the lter under
running water (40
degrees max).
Leave for 24hrs or until fully
dry before replacing.
Pull the pre-motor lter tab
and remove the lter from
the dirt container.
Emptying and cleaning the dirt container
Cleaning the pre-motor lter
Taking care of your machine
Taking care of your machine
IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the machine should overheat, the thermostat
will automatically turn the machine o. Switch o and unplug the vacuum cleaner. Check the machine for blockages and
clean the lters . Wash the lters with warm water (40°C max) and leave for 24 hours or until fully dry before replacing
into the machine.
For best cleaning results, lters should be tapped over a bin every 4-6 uses to remove dirt and debris and washed every
3 to 6 months (depending on the level of use). Don’t use your vacuum cleaner without all of the lters in place.
Pull and remove the
dirt container o the
vacuum cleaner.
Hold the dirt container over
a bin, press the dirt release
button to open and allow the
dirt to fall out.
Post-motor lter maintenance
IMPORTANT: The post-motor lter is designed to oer long life with no maintenance. The lter should be checked
periodically and when heavily discoloured it should be replaced. Please do not wash, scrub or brush the lter as this will
damage the lter.
24hrs
MA
X
40˚C
TIP
Don’t over ll the dirt
container to avoid
blocking the air ow
through the vacuum
cleaner and replace
lters every 6-9 months.
Don’t use your vacuum
cleaner without all of the
lters in place.
CAUTION
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VAX U84-AL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VAX U84-AL in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info