702173
5
Zoom out
Zoom in
Previous page
1/11
Next page
Twist the quick release
cord hooks and release
the power cord.
Plug the vacuum cleaner
into the mains and
switch on.
Place foot on the oorhead
and pull the handle
backwards to recline.
Press the On/O button
to switch the vacuum
cleaner on.
Using with the lift out cylinder attached
Using your machine – The full unit
Using your machine – The full unit
Press the brushbar button
to activate the brushbar
The brushbar should be
ON for carpets and OFF
for hard oors.
Slide the air vent cover
open to reduce suction,
if required on high
piled carpets.
For maximum cleaning on
hard oors, close the air
vent cover.
Pull and remove
the hose from
the hose holder.
Choose an accessory.
Attach the tool to the
end of the hose.
Press the On/O button
to switch the vacuum
cleaner on.
Press the handle release
clip and lift to remove the
handle with extension tube
from the back panel.
Attach the hose to the
handle, clipping the hose
end clip over the ridge on
the handle entry point.
Choose an accessory
Attach the tool to the end
of the extension tube.
Using the hose with the extension tube
Press the On/O button
to switch the vacuum
cleaner on.
Use the hose with the
handle for hard to
reach areas.
Using the hose/extension tube with the lift out cylinder attached
Always switch o the vacuum cleaner before connecting or disconnecting the hose/ tools.
For easier cleaning detach the lift out cylinder for stair and above oor cleaning. Hold the lift out cylinder by the carry handle
at all times when detached.
The accessories can be attached directly to the hose or extension tube.
Using the hose
TIP
The brushbar will not rotate when the vacuum
cleaner is stood in the upright position.
Whilst using the whole unit, don’t forget to use the
handle cord hook so that the cord doesn’t get caught
or tangled in the machine.
When the vacuum
is reclined with the
brushbar switched on,
never leave the vacuum
in one position for any
long period of time.
CAUTION
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VAX U84-AL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VAX U84-AL in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info