702173
8
Zoom out
Zoom in
Previous page
1/11
Next page
Let’s talk technical
Let’s talk technical
The brushbar indicator light
will illuminate red and the
brushbar will stop spinning if
the brushbar is obstructed.
Resetting/removing debris from the brushbar
IMPORTANT: Unplug and switch o vacuum cleaner before performing maintenance or troubleshooting checks.
If the brushbar has been obstructed, the Motor Protection Sensor may have been activated.
Switch the vacuum cleaner
o and clear the obstruction
from the brushbar. Stand the
vacuum cleaner in the upright
positon to reset the brushbar.
Place foot on the oorhead
and pull the handle backwards
to recline.
Press the On/O button
to switch the vacuum
cleaner on.
Press the brushbar button
to activate the brushbar.
Using a pair of scissors
remove any threads or hair
caught around the brushbar.
Changing the brushbar/advanced brushbar cleaning
Using a crosshead
screwdriver, remove 3
screws from the belt cover
on the side of the oorhead.
Pull to remove the belt cover
and brushbar location plate.
Remove belt.
Lift and separate brushbar
side cover.
Pull brushbar through side
cover to remove.
Changing the belt
Using a crosshead
screwdriver, remove 3
screws from the belt cover
on the side of the oorhead.
Pull to remove the
belt cover.
Pull to remove the brushbar
location plate. Remove belt.
Clean any debris from
spindle. Place new belt
onto spindle, lining up
teeth on the belt over
and onto the cog.
Removing dirt/debris from TurboTool
Slide the locking ring
to remove.
Lift and separate the housing.
Using a pair of scissors
remove any threads or hair
caught around the brushbar.
Line up the tabs on front
of housing and re-t. Slide
locking ring into groove
to secure.
Removing a blockage from the hose
Press the dirt container
release buttons
located the side of
the carry handle.
Pull and remove the
dirt container o the
vacuum cleaner.
Pull and remove the
hose from the hose holder.
Pull and stretch the hose,
any blockage in the hose
should then be visible.
Using a broom handle or similar blunt instrument, push into the stretched out hose to remove blockage.
TIP
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VAX U84-AL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VAX U84-AL in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info