3 Menu set 2
With menu "set 2" or SmartTRAK you can configure the following items:
Starting from the time of day display push or until "set 2"
appears.
Confirm that you wish to enter into the menu of
"
set 2
"
by pushing .
Once entered into the menu you can scroll with and through
the menu.
Setting the alarm clock time
The alarm clock goes off only at the surface. "Sound" must be turned "on" in
"set 2".
1.
Confirm that you wish to set the alarm time by pushing .
The hours start to flash.
2. Set the hours by pushing or .
3. Confirm the setting with . The minutes start to flash.
4.
Set the minutes by pushing or .
5. Confirm the setting with . "On" or "off" starts to flash.
6. "On" indicates "activated" (time of day display shows ), "off" indi-
cates "deactivated".
Switch between "on" or "off" by pressing .
7. Confirm the selected status with .
Setting the UTC offset (time zone)
The UTC offset allows you to quickly change the time when travelling to a new
time zone.
1.
Confirm that you wish to set the UTC offset by pushing .
The hours start to flash.
2. Set the hours by pushing or (
±13 hrs.)
.
3. Confirm the setting with . The minutes start to flash.
4.
Set the minutes in increments of 15 minutes by pushing or .
6. Confirm the selected status with .
Adjusting the time of day
By default the time is set to Greenwich Mean Time (GMT). You can adjust it to
your time zone either in this menu or using the UTC offset (see above).
1.
Confirm that you wish to adjust the time of day by pushing .
The hours start to flash.
2. Set the hours by pushing or .
3. Confirm the setting with . The minutes start to flash.
4.
Set the minutes by pushing or .
5. Confirm the setting with .
42
VIII Settings
VIII UWATEC
®
Aladin
®
dive computers