550271

UWATEC Aladin Tec Manual

41
Zoom out
Zoom in
Previous page
1/48
Next page
41
VIII Settings
VIII UWATEC
®
Aladin
®
dive computers
VIII
English
Switching the audible attention signals on and off
With this option you can switch off the audible attention signals only (the
audible alarms remain active). Refer to page 17 to see this distinction.
1.
Confirm that you wish to change the setting of the audible attention signals
by pushing .
"On" or "off" starts to flash.
2. Switch between "on" or "off" by pressing .
3. Confirm the setting with .
Switching the water contacts on and off
On submerging in water the water contacts switch on Aladin
®
automatically
.
If you chose the option „Water contacts off“,
Aladin
®
will turn on with a delay of up to 1 minute
into the dive. This will affect functioning of the
computer.
Make sure that the computer is on before starting
the dive.
1.
Confirm that you wish to change the setting of the water contacts by pushing
.
"On" or "off" starts to flash.
2. Switch between "on" or "off" by pressing .
3. Confirm the setting with .
Resetting the remaining saturation
Diving after a reset of the remaining saturation
may lead you into
potentially
hazardous situations
which could result in death or serious injury.
After a reset of the remaining saturation do not
dive for at least 48 hours.
If you dive after resetting the remaining saturation the computer will mis-
calculate your decompression, which may result in serious injury or death.
Reset the remaining saturation only if you know you will not be diving,
flying or going to higher altitude for the next 48 hours.
Resetting the desaturation should only be done when there is a valid reason,
e.g. loaning the computer to somebody who has not dived in 48 hours or
more. When the computer itself has remaining saturation you must assume full
responsibility for the consequences of resetting the remaining saturation.
1.
Confirm that you wish to reset the displayed saturation by pushing .
"On" starts to flash.
2. Switch between "on" or "off" by pressing .
3. Confirm the setting with . If you have selected "off", "code" and
"000" appear.
4.
Set the first digit by pushing and
. Confirm with
.
Repeat point 4 for the next 2 digits. If you entered the right code the desatu-
ration will be reset to zero (desat off)
Code: 313
WARNING
WARNING
DESADESATT
DESADESATT
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UWATEC Aladin Tec at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UWATEC Aladin Tec in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info