44
VIII Settings
VIII UWATEC
®
Aladin
®
dive computers
Showing the hardware serial number of Aladin
®
This number is needed when reporting problems or for other maintenance
related issues.
ID Number
Switching the sound on and off
If you turn off the sound, the buzzer is effectively deactivated. You will have
no audible warnings (alarms and attention messages)! Without audible war-
ning you could get into potentially hazardous situations, which could result in
death or serious injury.
You must assume full responsibility for turning off the sound.
1.
Confirm that you wish to change the setting by pushing .
"On" or
"off" starts to flash.
2. Switch with between "on" and "off".
3. Confirm the setting with . If you have selected "off", "code" and
"000" appear.
4.
Set the first digit by pushing and
. Confirm with
.
Repeat point 4 for the next 2 digits. If you entered the right code the sound
will be turned off.
Code: 313
Setting the
"
sound
"
to
"
off
"
applies also to surface functions (mountain alarm,
wake up alarm, change of altitude range).