596878
41
Zoom out
Zoom in
Previous page
1/66
Next page
5. Repeat steps 1-4. When you are finished with a full session, you
will reach a screen that reads Adaptation Complete.
PROMPTS
Allows you to select the voice command system characteristics.
1. From standby mode, press the OK Key [OK] to unlock the
keypad, then press the OK Key [MENU], the Directional Key
right twice for SETTINGS & TOOLS, then slide out the QWERTY
keyboard and press 2. Tools, 1. Voice Commands.
2. Press the Right Soft Key
[Settings], “5. Prompts”.
3. Select “1. Mode or 2. Audio playback by pressing the Directional
Key
up or down, then press the OK Key [OK].
Mode: Select the voice command system mode from the following:
- Prompts: For handset to read out voice command prompts.
- Readout: For handset to read out prompts, dialing digits and menus.
- Tones Only: For handset to prompt you with a tone only.
Audio playback: Allows audio playback to play through the speakerphone or
through the earpiece. Select “Automatic”, Speakerphone or
Earpiece with the Directional Key up or down.
CALL ALERT
Provides audible readout of the phone number and/or name (if in your contact list) of
an incoming call.
1. From standby mode, press the OK Key [OK] to unlock the
keypad, then press the OK Key [MENU], the Directional Key
right twice for SETTINGS & TOOLS, then slide out the QWERTY
keyboard and press 2. Tools, 1. Voice Commands.
2. Press the Right Soft Key
[Settings], “6. Call Alert”.
3. Select “Ring Only”, Caller ID + Ring or “Name Repeat by pressing
the Directional Key
up or down, then press the OK Key
[OK].
ABOUT
1. From standby mode, press the OK Key [OK] to unlock the
keypad, then press the OK Key [MENU], the Directional Key
right twice for SETTINGS & TOOLS, then slide out the QWERTY
keyboard and press 2. Tools, 1. Voice Commands.
2. Press the Right Soft Key
[Settings], “7. About”.
3. The VoiceSignal version appears.
4. To return to the previous screen, then press the OK Key
[OK].
78
Chapter 4 Menu Function
Voice ToolsVoice Tools
CALCULATOR
The Calculator allows you to perform simple mathematical calculations.
To access the calculator:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 2. Tools, 2. Calculator.
2. Follow the instructions below to calculate 8×6÷4-2.5=9.5
Input 8 and then press the Directional Key right.
Input 6 and then press the Directional Key left.
Input 4 and then press the Directional Key down.
Input 2 and then press the to input (.).
Press 5.
Then press the OK Key and you will see the answer (9.5).
3. To reset, press the Left Soft Key [Clear].
Directional Key right : X, Directional Key down : -,
Directional Key left : ÷, Directional Key up : +, * Key : .,
Left Soft Key : Clear, OK Key : =.
To change the displayed number from positive (+) to negative (-) and vice versa,
press # Key .
Press the Right Soft Key [Operator] to use parenthesis 1. (”, 2. )” and
3. Exponent”.
CALENDAR
The Calendar tool provides easy and convenient access to your schedule.
Simply store your appointments and your phone will alert you to them.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], the Directional Key right
twice for SETTINGS & TOOLS, then slide out the QWERTY keyboard
and press 2. Tools, 3. Calendar.
Shortcut: In idle mode, press the Directional Key down to access Calendar.
2. Press the Directional Key up, down, left or right to highlight the
scheduled day.
3. Press the Left Soft Key
[Add].
4. The Appointment field is highlighted. Enter the name of the event.
Press the Directional Key
down to set the other fields for the
event:
APPOINTMENT
Use the keypad to enter an appointment in your schedule.
Menu Function Chapter 4
79
ToolsTools
080625_TXT8010_ELVIS_M_EN_REV00.indd 78-79080625_TXT8010_ELVIS_M_EN_REV00.indd 78-79 2008.6.25 9:35:19 PM2008.6.25 9:35:19 PM
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UTStarcom Blitz at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UTStarcom Blitz in the language / languages: English as an attachment in your email.

The manual is 5,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info