596878
39
Zoom out
Zoom in
Previous page
1/66
Next page
VOICE COMMANDS
Your phone is equipped with an AVR (Advanced Voice Recognition) feature.
This feature allows you to make calls or use the phone’s functions by simply
using your voice. All you have to do is talk into the phone, and the phone will
recognize your voice and complete tasks by itself.
1. To access Voice Commands from standby mode, press the OK Key
[OK] to unlock the keypad, then press the OK Key [MENU], the
Directional Key right twice for SETTINGS & TOOLS, then slide out
the QWERTY keyboard and press 2. Tools, 1. Voice Commands.
Shortcut: In idle mode, press and hold the CLR Key to access the Voice Commands
menu.
2. The phone displays the Command menu and prompts you to say
the name of the command you want to use. To complete your task,
simply follow the voice prompts. You can speak the name of the
command after you hear a beep.
You can hear a beep in the Tone Only Mode (Settings & Tools > Phone Settings > Voice
Commands > Mode > Tones Only Mode) while you can see a prompt without a beep
sound in the Prompt Mode or Readout Mode.
3. Select one of the following options by pressing the Directional Key
up or down, press the OK Key .
Call <Name or #> /
Send <MSG Type> /
Go To <Shortcut> /
Check <Item> /
Contact <Name> /
Play <Playlist> /
My Verizon /
Help
4. When it recognizes one of these commands, the phone launches the
associated application. If the phone does not hear a command within
approximately eight seconds, AVR mode will turn itself off.
CALL <NAME OR #>
Use the Call command to voice dial a name from your contact list or a phone
number. When dialing a number, pronounce each digit, but do not pause noticeably
between the digits.
1. You will hear “Please say a command and the Voice Commands
menu will be displayed.
2. If calling a contact from your list, say Call <Name>. Your phone will
ask you to confirm the name you said. Say Yes if it was repeated
correctly. That phone number will be dialed. If there is more than one
number saved for that contact, you will be asked to confirm which
number to dial.
Examples: - Call Tom Smith, - Call 617 555-1212, - Call
Bob Carson’s mobile, - Call Dee Harper at Home.
74
Chapter 4 Menu Function
Voice ToolsVoice Tools
SEND <MSG TYPE>
Use the Send command to send a text or other type of message to a specified name
or number.
1. You will hear “Please say a command and the Voice Commands
menu will be displayed.
2. S a y Send followed immediately by one of the following items:
Te xt /
Picture
Examples: - Send Picture to Dee Harper’s Mobile,
- Send Text Tom Smith.
GO TO <SHORTCUT>
Use the Go To command to open an application on your phone. You can say ”Go To
by itself and be prompted to say the application name, or you can skip the prompt
by saying ”Go To followed by the application name.
1. You will hear “Please say a command” and the Voice Commands
menu will be displayed.
2. S a y Go To followed immediately by one of the following items:
Contacts /
Recent Calls /
Messaging /
Media Center /
Settings & Tools /
Mobile Web /
My Music
CHECK <ITEM>
The Check command lets you check status information for your phone. You can say
Check or Check Status to see and hear all status information.
1. You will hear “Please say a command and the Voice Commands
menu will be displayed.
2. S a y Check followed immediately by one of the following items:
Status /
Voicemail /
Messages /
Missed Calls /
Time /
Signal Strength /
Battery /
Volume
CONTACTS <NAME>
Use the Lookup command to retrieve and display information for any name stored
in your contact list.
1. You will hear “Please say a command and the Voice Commands
menu will be displayed.
2. S a y Lookup <Name>”.
Examples: - Lookup Tom Jones.
3. The View Contact page will be displayed for that contact name.
Menu Function Chapter 4
75
Voice ToolsVoice Tools
080625_TXT8010_ELVIS_M_EN_REV00.indd 74-75080625_TXT8010_ELVIS_M_EN_REV00.indd 74-75 2008.6.25 9:35:17 PM2008.6.25 9:35:17 PM
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UTStarcom Blitz at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UTStarcom Blitz in the language / languages: English as an attachment in your email.

The manual is 5,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info