596878
40
Zoom out
Zoom in
Previous page
1/66
Next page
PLAY <PLAYLIST>
Use the Play command to playback one of the playlists. Say “PLAY” followed by a
playlist and your phone will playback the recognized playlist for you.
1. You will hear “Please say a command and the Voice Commands
menu will be displayed.
2. S a y Play <Playlist>.
Say Play All Songs (to playback all songs saved in your phone.)
MY VERIZON
1. You will hear “Please say a command and the Voice Commands
menu will be displayed.
2. S a y My Verizon”.
3. Your phone will make a web connection.
HELP
1. You will hear “Please say a command and the Voice Commands
menu will be displayed.
2. S a y Help”.
3. The Help guide will be displayed on your phone.
VOICE COMMANDS SETTINGS
DIGIT DIAL READOUT
The Digit Dial Readout setting controls if digits are read out when you type in a phone
number with the keypad.
1. From standby mode, press the OK Key [OK] to unlock the
keypad, then press the OK Key
[MENU], the Directional Key
right twice for SETTINGS & TOOLS, then slide out the QWERTY
keyboard and press 2. Tools, 1. Voice Commands.
2. Press the Right Soft Key
[Settings], “1. Digit Dial Readout”.
3. Select “On/Off by pressing the Directional Key
up or down,
then press the OK Key [OK].
CONFIRMATION
When voice recognition is not confident it has recognized a name or number correctly,
it will show you a list of up to three choices. You can control when choice lists appear.
1. From standby mode, press the OK Key [OK] to unlock the
keypad, then press the OK Key [MENU], the Directional Key
right twice for SETTINGS & TOOLS, then slide out the QWERTY
keyboard and press 2. Tools, 1. Voice Commands.
76
Chapter 4 Menu Function
Voice ToolsVoice Tools
2. Press the Right Soft Key [Settings], “2. Confirmation”.
3. Select “Automatic”, Always Confirm or “Never Confirm” by
pressing the Directional Key
up or down, then press the OK
Key [OK].
SENSITIVITY
The Sensitivity setting controls how the voice recognition software determines when a
spoken word is a match. If you frequently experience the messages “Please Repeat... or
“No Match Found, adjust the sensitivity toward Reject Less. If you frequently
experience false activations (when the phone recognizes a name you didn’t say), adjust
the sensitivity toward Most Sensitive.
1. From standby mode, press the OK Key [OK] to unlock the
keypad, then press the OK Key [MENU], the Directional Key
right twice for SETTINGS & TOOLS, then slide out the QWERTY
keyboard and press 2. Tools, 1. Voice Commands.
2. Press the Right Soft Key
[Settings], “3. Sensitivity”.
3. Select “Most Sensitive”, Recommended or Least Sensitive” b y
pressing the Directional Key
up or down, then press the OK
Key [OK].
ADAPTATION
Voice Command is speaker independent, which means that no training or adaptation
is required. Some users with heavy accents or unusual voice characteristics may find
difficulty in achieving high accuracy with speaker independent Voice Command,
so the Adapt Voice feature allows users to dramatically improve the recognition
accuracy through adaptation. Users who get acceptable recognition accuracy will find
no additional benefit to performing the Adapt Voice adaptaion.
1. From standby mode, press the OK Key [OK] to unlock the
keypad, then press the OK Key [MENU], the Directional Key
right twice for SETTINGS & TOOLS, then slide out the QWERTY
keyboard and press 2. Tools, 1. Voice Commands.
2. Press the Right Soft Key
[Settings], “4. Adaptation”.
3. Select “1. Adapt Voice or 2. Reset Voice by pressing the
Directional Key
up or down, then press the OK Key [OK].
Adapt Voice: Requires that you make recordings of your voice to customize the voice
recognitions system. It will take a few minutes.
Reset Voice: Once you finish the adaptation process, you can reset the adaptation
to factory default.
Reset Voice menu option only appears after you finish the Adapt Voice process.
4. Wait for the beep, and then repeat the sentences using a normal
tone of voice.
Menu Function Chapter 4
77
Voice ToolsVoice Tools
080625_TXT8010_ELVIS_M_EN_REV00.indd 76-77080625_TXT8010_ELVIS_M_EN_REV00.indd 76-77 2008.6.25 9:35:18 PM2008.6.25 9:35:18 PM
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for UTStarcom Blitz at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of UTStarcom Blitz in the language / languages: English as an attachment in your email.

The manual is 5,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info