Manual Unold 68615 Backmeiser (page 33 of 140) (English, German, Dutch, French, Spanish)

484943

Zoom out

Zoom in

1/140

Program

number

Program name Program description

8 TEIG

DOUGH

For preparing dough, without

baking

9 ULTRA-

SCHNELL

ULTRA-FAST

This program is suitable for

light breads made of superfine

flour (wheat or a mixture of

wheat and spelt). This program

is not suitable for whole grain

bread or rye bread, nor should

it be used for sourdough bread.

10 BACKEN

BAKE

For baking of yeast or batter

dough that has been prepared

separately (either by hand or

in the DOUGH program). This

program is not suitable for pie

dough or choux pastry dough.

11 SÜSSSPEISEN

DESSERT

For baking sweet baked goods.

BRÄUNGUNGSGRAD/BROWNING

With this button you can set the degree of browning to HELL/

LIGHT – MITTEL/MEDIUM – DUNKEL/DARK. This function is not

available in the following programs: JAM, DOUGH and the user

program. The selected setting is shown on the display.

BROTGRÖSSE/LOAF SIZE

This button is used to select the size of the loaf in various

programs:

STUFE/LOAF SIZE I = for smaller loaves (approx. 500-850 g)

STUFE/LOAF SIZE II = for larger loaves (approx. 850-1,200 g)

Please note that it is not possible to select the loaf size in the

following programs: BAKING POWDER, JAM, DOUGH, BAKE and

DESSERT. You will find our recommendations in the recipes. The

selected setting is shown on the display.

You can also bake smaller loaves by reducing the quantities by

one-half, e.g. for singles and small households. In this case, we

recommend that you always use the BASIC program on LOAF

SIZE I. Please be aware, however, that the loaf will be relatively

flat in this case.

PAUSE

The PAUSE button can be used to briefly interrupt the program,

for example to remove the kneader from the dough or to brush

the surface of the bread with water or milk, etc. Press the PAUSE

button for about 1 second to interrupt the current program.

When the display blinks, you know that the program has been

interrupted. Now you can remove the kneader or brush the surface

of the bread. Then close the lid. To resume the program, press

the PAUSE button again for about 1 second. The display stops

blinking and the program continues.

CAUTION: Do not interrupt the program for more than about

5 minutes. Longer interruptions can affect the rising of the dough

and ruin the bread.

As long as the pause function is active (i.e. the display is blinking),

the START/STOP button is locked and the program cannot be

completely discontinued.

LICHT/LIGHT

The Backmeister

Skala is equipped with lights for the baking

compartment, so you can observe the progress of the dough or of

the bread at any time without having to open the lid. The baking

compartment is not lighted throughout the entire program. To

check the dough, press the LICHT button to turn on the light

in the baking compartment. After one minute, or as soon as you

press the button again, the light goes out.

BUTTON LOCK

To prevent accidental pressing of the buttons, e.g. by children,

you can lock the buttons. If you first press the ABSCHNITT button

and then the BROWNING button, you will hear three beeps,

indicating that the buttons (with the exception of ABSCHNITT

and BRÄUNUNGSGRAD) are deactivated. To turn off the button

lock function, press the ABSCHNITT button again and then the

BRÄUNGSGRAD button and wait for the three beeps. Please note:

when the button lock function is on, the scale cannot be used.

EIGENPROGRAMM/USER PROGRAM

In addition to the other numerous programs provided by the

BACKMEISTER

you can also program your own USER PROGRAM.

You can change the basic time and program phase settings as

programmed at the factory or leave out various program phases.

This allows you to develop your own individual program for baking

bread or preparing dough. Below you will find a sample recipe.

First you should become familiar with the following information

on the basic programming and use of the USER PROGRAM.

USER PROGRAM

The program features the following options

Browning not programmable

Timer programmable

Loaf size I and II not programmable

The default program is the same as for the BASIC program.

Phase Preset Programmable time frame

Total time 3:00 hours

Knead 1 10 minutes 6-14 minutes

Rise 1 20 minutes 20-60 minutes

Knead 2 15 minutes 5-20 minutes

Rise 2 25 minutes 5-120 minutes

Rise 3 45 minutes 0-120 minutes

Bake 65 minutes 0-80 minutes

Keep warm 60 minutes 0-60 minutes

The times can be programmed as shown in the table.

Proceed as follows:

Select the USER PROGRAM with the Menu button.

Select the desired phase with the ABSCHNITT button. Knead

1 and the programmed time 0:10 for this phase appear on the

display.

The time can be changed by means of the ZEITWAHL button.

Press it repeatedly until the desired time appears on the display

(past OFF, if necessary).

Confirm the change with the ABSCHNITT button. Press this

button again and the next program phase and the programmed

time will appear on the display: Rise 1 = and 0:20.

If the maximum programmable time for the respective program

phase is exceeded by pressing the ZEITWAHL button, O will

appear on the display if this is possible according to the above

table. This phase is then skipped during the program.

Every programmed setting must be confirmed by pressing the

ABSCHNITT button, so you can continue programming the next

program phase.

Once you have programmed all phases to suit your preferences,

conclude the programming by pressing the ABSCHNITT button

and then the START/STOP button. The programmed time for the

user program appears on the display. The program then starts

either immediately or after the time set via the timer function.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Unold 68615 Backmeiser in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Unold 68615 Backmeiser Manual

Product: