611012

Uniden UBC785XLT Manual

33
Zoom out
Zoom in
Previous page
1/60
Next page
Note: When in Hold mode, you can use the VFO to step up or down through the channels.
You can also switch from stepping up/down through channels to stepping up/down
through frequencies by pressing the
VFO.
RF Attenuation Feature
The UBC785XLT comes with an RF Attenuation feature. If you're near an unusually strong
signal source, the signal may overload the scanner. The scanner may stop repeatedly on
that signal and miss other transmissions.
The RF Attenuation feature works in all modes and attenuates (reduces) the incoming signal
strength to prevent stronger signals from overloading the scanner.
1. Press
MENU.
2. For Search mode, select
1: SEARCH OPTION / 2:CHAIN SEARCH /
4:ATTENUATOR by rotating the VFO and pressing E.
For Scan mode, select
2:SCAN OPTION by rotating the VFO and pressing E. Then
select the channel number by rotating the
VFO and pressing E.
Select
5:ATTENUATOR by rotating the VFO and pressing E.
3. Select
1:ON by rotating the VFO and pressing E.
Note: Attenuation will only be active for the specified channel. In Search mode, it is applied
to the Search ranges in all banks.
☞ Remember! You can also use ▲ or ▼ instead of rotating the VFO.
Also instead of pressing
E, you can press the VFO control.
Setting the Delay Mode for Frequency
When scan or search stops on a channel, there is a brief pause before resuming. A default
delay of 2 seconds is automatically set for each frequency . If you want to change the delay
period:
1. Press
MENU.
2. For Scan mode, select
2:SCAN OPTION by rotating the VFO and pressing E.
3. Select the channel number of the stored frequency to be delayed by rotating the
VFO
and pressing E.
4. Select
2:DELAY and press E.
5. Rotate the
VFO to select one of the delay periods and press E.
6. For Search mode, select
1:SEARCH OPTION / :CHAIN SEARCH / 3:DELAY
by rotating the VFO and pressing E, then set to a delay period the same way as the
Scan mode setting.
29
UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 29
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden UBC785XLT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden UBC785XLT in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info