611012
32
Zoom out
Zoom in
Previous page
1/60
Next page
Scanning
1. After programming frequencies, simply press SCAN to begin
scanning. During scanning, when you rotate the
VFO, you can
select the direction (
or ) you want to scan.
2. The indicators of active banks appear on the display, and the
bank being currently monitored flashes. You can deselect
banks from active scanning by entering their number on your keypad. The deselected
bank indicator changes to "-", and the banks channels are not scanned.
Note: At least one bank must be active. You cannot deactivate all ten banks at the same
time. If you try to deselect all the banks, the first bank is automatically selected.
To restore a bank for active scanning, enter the banks number on your keypad.
The banks indicator will be displayed again.
3. During normal scanning the scanner skips
unprogrammed or locked out channels.
4. When a transmission is received, the scanner
stops on that channel. When the transmission
ends, scanning resumes automatically.
Scan Hold Feature
If you want to stop on a channel during scanning, press
/HOLD.
Note: When you press and hold SCAN for 2 seconds, the
scanner will move to the smallest empty channel.
If you want to resume scanning, press
RSM.
To directly access a specific channel:
There are several ways to access a specific channel quickly.
1. Press
/HOLD.
2. Using the keypad, enter the channel number.
3. Press
/HOLD again.
Another method is as follows:
1. Press
/HOLD.
2. When the
VFO setting is in the channel mode, rotate the VFO until the desired channel
is displayed. The scanner will automatically go to Hold mode.
28
1345
9 10
26
7 8
CHANNELS
Frequency
not entered
Frequency
Locked Out
(L/O)
SCAN
C 001
SCAN
Bank 1234567890
C 001
1300.0000 FM
25cm Amateur 1
UNIDEN Group A
C1000
0000.0000
Bank 10
UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 28
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden UBC785XLT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden UBC785XLT in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info