611012
31
Zoom out
Zoom in
Previous page
1/60
Next page
27
Beep Alert
The scanner can alert you with three beeps at the beginning of a transmission on an
assigned frequency.
Assigning the Beep Alert to a Channel
This alert can be set ON/OFF for every channel.
1. Press
MENU.
2. Select
2:SCAN OPTION by rotating the VFO and pressing E.
3. Select the channel number by rotating the
VFO and pressing E. You can also enter the
channel number by using the keypad and pressing
E.
4. Select
4:BEEP ALERT by rotating the VFO and pressing E.
5. Select
1:ON or 2:OFF by rotating the VFO and pressing E.
Note: If NOT REGISTERED appears, make sure a frequency is stored in the channel.
Remember! You can also use or instead of rotating the VFO.
Also instead of pressing
E, you can press the VFO control.
Programming Tips
Group similar services into a bank. For example, program police frequencies in channels 1
through 10 and fire/emergency into channels 51 through 60, and so on.
Put the frequency that you listen to the most or the most important frequency into a
Priority channel.
To quickly program a series of channels, start with the lowest number channel.
For example, when you are programming five new frequencies into channels 4 through
8, start with channel 4. After you finish programming a channel, rotate the
VFO up or
press
to go to the next higher channel.
Write down your programmed channels and frequencies and put them in a convenient
place in case of accidental reprogramming.
Frequencies are rounded off according to the step of each channel.
When you are overwriting a tagged channel with a new frequency, the previous alpha tag
will be deleted. Re-register the alpha tag.
When programming frequencies, a 2 second delay is set automatically but can be
changed in the menu mode.
UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 27
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden UBC785XLT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden UBC785XLT in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info