647705

Uniden BC370CRS Manual

23
Zoom out
Zoom in
Previous page
1/40
Next page
23
Using the Radio Controlled Clock
3. Use ▲ or ▼, or press the ON or OFF soft key to select the correct
option.
4. Once you have selected the correct setting, press E, then slide the
TIME switch back to Clock.
Note that turning on this setting tells the receiver to set the DST
according to the received NIST signal. It does not actually change the
time to daylight savings time unless it is appropriate.
Turning On/Off Radio Control
In some areas it is just not possible to receive the NIST signal. If this is
the case where you are, you should turn off the RCC option.
1. Slide the TIME switch to Clock Set. The hours setting starts to flash,
and the soft-key display changes to show the time-set functions.
2. Press the RCC soft key. The scanner shows the current RCC setting,
(ON or OFF).
3. Use ▲ or ▼, or press the ON or OFF soft key to select the desired
setting.
4. Once you have selected the correct setting, press E, then slide the
TIME switch back to Clock.
Forcing a Reception Attempt
You can force the scanner to try to receive the NIST signal at any time.
This is sometimes useful if you are trying to find the best position for the
scanner and don’t want to wait until the beginning of the hour.
1. Slide the TIME switch to Clock Set. The hours setting starts to flash,
and the soft-key display changes to show the time-set functions.
2. Press the RX soft key. The dish icon ( ) and
RX icon starts to flash.
3. Slide the TIME switch back to Clock. The scanner will attempt to
receive the signal for 10 minutes. You can see the NIST signal strength
by referring to the signal bars next to the dish icon. When the scanner
successfully receives the time signal, the icon will stop flashing. If the
scanner cannot receive the signal within 10 minutes, the icon turns off.
UB338ZH(BC370CRS) 2/23/06 9:25 AM Page 23
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BC370CRS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BC370CRS in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info