647705

Uniden BC370CRS Manual

21
Zoom out
Zoom in
Previous page
1/40
Next page
21
Using the Radio Controlled Clock
Your scanner’s Clock displays all the time. When you turn off the radio
functions, it also displays the current seconds and date. It can also be
used as a standard alarm clock. Even though your scanner can set its
time automatically from the nationwide NIST broadcast, since this signal
is usually weak and can often only be received reliably at night in many
areas, we recommend you manually set the time to get started.
Setting the Current Time and Date
Follow the steps to set the current time and date:
1. Move the slide switch to Clock Set.
The hour digits flash.
2. Press ▲ or ▼ to change the hour by one
hour or press the number keys to select
the present hour. Then press E/PGM.
The minutes digits flash.
3. Press ▲ or ▼ to change the minute setting by one minute or press the
appropriate number keys to enter the minutes. Press E/PGM. Seconds
reset to 00, the
AM/PM icon flashes.
4. Press ▲ or ▼ to move from AM to PM and back. Press E/PGM.
The current year flashes.
5. Press ▲ or ▼, or press the appropriate number keys to select the
correct year. Press E/PGM, the current month flashes.
6. Press ▲ or ▼, or press the appropriate number keys to select the
correct month. Press E/PGM, the current day flashes.
7. Press ▲ or ▼, or press the appropriate number keys to select the
correct day. Press E/PGM.
To exit the clock setting mode, move the slide switch to Clock.
Setting the Radio Controlled Clock Options
The radio controlled clock attempts to receive the time at the top of every
hour (e.g. 12:00, 1:00, 2:00 and so on) until it receives the time. While it
is checking for the time, the dish icon ( ) flashes and the signal
strength indicator appears to show the condition of the received NIST
signal. When it has successfully received the time, the dish icon ( )
will appear in the display. The dish remains steady for 24 hours from the
last successful signal reception. Even with a good signal, it will take 2-5
minutes to set the time from the NIST signal.
Using the Radio Controlled Clock
UB338ZH(BC370CRS) 2/23/06 9:25 AM Page 21
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BC370CRS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BC370CRS in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info