647705
22
Zoom out
Zoom in
Previous page
1/40
Next page
22
Using the Radio Controlled Clock
The NIST signal is very weak, so might not from all parts of your house or
at all times of day. Typically, reception is best at night and near a window.
The time reception antenna is integrated into your scanner, and is not
part of the AM or scanner antenna.
Notes:
The antenna receives most strongly when the scanner keeps its left
side facing to the source of waves, Fort Collins in Colorado.
Computers and some light dimmers can generate signals that can
interfere with the NIST signal. If this occurs, reposition the scanner away
from these devices, or turn them off to remove the interfering signal.
If the scanner is inside of a building that has a lot of metal, the time-
setting signal will be blocked. Try positioning the scanner near a window.
There are four atomic clock settings:
Time Zone
Daylight Savings Time
RCC (Radio Controlled Clock) On or Off
Signal RX
Setting Your Time Zone
1. Slide the TIME switch to Clock Set. The hours setting starts to flash,
and the soft-key display changes to show the time-set functions.
2. Press the TZ soft key. The first set of time zone selections appears.
3. Press the soft key that corresponds to the time zone you are in. To see
more options, press the NEXT or PREV soft key. Or, to set your time
zone’s offset from UTC, use or .
4. Once you have selected the correct setting, press E, then slide the
TIME switch back to Clock.
Setting the Daylight Savings Time Option
If your area pays attention to Daylight Savings Time, turn on the DST
option by:
1. Slide the TIME switch to Clock Set. The hours setting starts to flash,
and the soft-key display changes to show the time-set functions.
2. Press the DST soft key. The scanner shows the current DST setting
(ON or OFF).
UB338ZH(BC370CRS) 2/23/06 9:25 AM Page 22
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden BC370CRS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden BC370CRS in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info