589311

Ultimate speed ULG 3.8 A1 - IAN 74189 Manual

37
Zoom out
Zoom in
Previous page
1/44
Next page
37 GB
Introduction / SafetyIntroduction
see Fig. B:
10
Charging station
11
Mains lead
12
Mounting holes
13
„+“-Pole connection cable (red), incl. ring shoe
14
„–“-Poleconnectioncable(black),incl.ringshoe
15
„+“-Pole quick-contact terminal (red), incl. red
fixing screw
16
„–“-Polequick-contactterminal(black),incl.
black fixing screw
Q
Technical Data
Inputvoltage: 220–230–240V
~
50 / 60 Hz
Powerconsumption: 60W
Reversecurrent*: <5mA(noACinput)
Nominaloutputvoltage:6V
/ 12 V
Nominaloutputcurrent:0.8A/3.8A
Chargingvoltage: 7.3Vor14.4Vor14.7V
Chargingcurrent: 0.8A±10%
3.8A±10%
Batterytype: 6Vlead-acidbattery
1.2Ah–14Ah
12 V lead-acid battery
1.2Ah–120Ah
Temperature(min.): 0°C
Temperature(max.): 40°C
Housingprotectiontype: IP65(dust-tight,protected
against water jets)
Safetyclass: II/
* = Return current is the current used by the
charging station battery, when no mains
current is connected.
Q
Safety
Safety information
DANGER! Avoid danger to life and limbs
caused by improper use!
CAUTION! Do not operate the appliance
with a damaged cable, power cord or
plug. A damaged power cord causes danger
to life by electric shock.
If damaged, have the power cord repaired by
authorised and trained technicians only! Please
contact the service department for your country!
PROTECT YOURSELF FROM
AN ELECTRIC SHOCK! When
connecting the charging station, use
a screwdriver and a spanner with an insulated
handle!
DANGER OF ELECTRIC SHOCK! Do not
operate the vehicle if you are charging a battery
while it is still in the vehicle! Switch off the igni-
tion and park the vehicle. Apply the parking
brake (e.g. in cars) or secure with a mooring
rope (e.g. electric boat)!
DANGER OF ELECTRIC SHOCK! Disconnect
the battery charger from the mains before you
make or break the connections to the battery.
- First connect the clamp that is not connected
to vehicle bodywork, then connect the other
clamp to the vehicle bodywork at a point
away from the battery and the fuel line. After
this is done, you can connect the battery
charger to the mains.
- After charging, disconnect the battery charg-
er from the mains. Then disconnect the clamp
attached to the vehicle bodywork before you
disconnect the clamp from the battery.
DANGER OF ELECTRIC SHOCK! Handle
theconnectingcables(„–“and„+“)bytheir
insulated areas only!
DANGER OF ELECTRIC SHOCK! Ensure
that there is complete protection from moisture
at the connections to the battery and at the
mains outlet socket!
DANGER OF ELECTRIC SHOCK! Carry out
the mounting, maintenance and cleaning of the
battery charger only when it is disconnected
from mains!
DANGER OF ELECTRIC SHOCK! After
completion of the charging and maintenance
charging process on a battery mounted in a
vehicle, first disconnect the negative connection
cable (black) of the battery charger from the
negative terminal of the battery.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ultimate speed ULG 3.8 A1 - IAN 74189 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ultimate speed ULG 3.8 A1 - IAN 74189 in the language / languages: French as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ultimate speed ULG 3.8 A1 - IAN 74189

Ultimate speed ULG 3.8 A1 - IAN 74189 User Manual - English, German - 24 pages

Ultimate speed ULG 3.8 A1 - IAN 74189 User Manual - Dutch - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info