Manual Ultimate speed ULG 12 A2 - IAN 277071 (page 12 of 63) (English, German, Dutch, Danish, French)

647781

Zoom out

Zoom in

1/63

12 GB/IE/NI

Warranty and service ... / Environmental instructions and disposal informationOperation / Maintenance and care / Warranty and service information

Connect the black connector clamp

to the

negative battery terminal. (The negative terminal

is marked with a “-“ symbol and a black mark.)

If the connector clamps are connected correctly,

the car charger will automatically select the cor-

rect battery type. You may review it in the “Bat-

tery Type“ option ﬁeld and if necessary change

it by pressing the battery type button

Now select the “Start“ function using the Charge

Start button

. The cart charger will now ana-

lyse the battery‘s charge level. The display will

now read “0“.

Start the vehicle‘s ignition. The display will now

show a 5 second countdown (of which 2 second

priming / analysis function and 3 second jump

start function at 75 A) when needing the car

charger for jump starting (previously analysed

by the car charger). During this countdown the

car charger will brieﬂy deliver 75 A to bridge

the battery to start the car. This is followed by

a 180 second pause to protect the battery. The

cycle will now restart (2 second priming / anal-

ysis function and 3 second jump starting at

75 A / 180 second pause).

To disconnect the device, ﬁrst remove the termi-

nal clamps (

) and unplug the power

cord

Note: If the battery is completely drained, the 75 A

will not be suﬃcient to start all engines (e.g. diesel

vehicles).

In this case, please select the “Fast Charge“

option using the Charge Start button

and

charge the battery 60 % (preheating of diesel

engines draws power from the battery. This re-

quires 60 % after preheating).

You can monitor the charging process in the display

by selecting the “Battery %“ option using the digital

display button

Once 60 % has been reached, jump start again.

Attention: Exit the mode by unplugging the

mains cable

Replacing the fuse

The car charger fuse can be damaged by e.g. hard-

ware failure, overload, etc.

Unplug the power cord

before replacing

the fuse.

Remove the fuse

cover by slightly pressing

in the side.

Unscrew the fuse

with a ﬁtting open-end

spanner and secure the new fuse.

Then screw it tight and replace the cover

Note: If you need a new fuse, please contact

our service department (see chapter Warranty

and Service Information).

Maintenance and care

lways unplug the power cord

from the mains

socket before working on the car charger.

The device is maintenance-free. Switch oﬀ the

device. Clean the device‘s metal and plastic with

a dry cloth.

Never use solvents or other abrasive cleaners.

Warranty and service

information

Creative Marketing Consulting GmbH

warranty

Dear customer,

the warranty for this device is 3 years from the date

of purchase. In the event of product defects, you

have legal rights against the retailer of this product.

Your statutory rights are not limited in any way by

our warranty detailed below.

Warranty terms

The warranty period begins on the date of purchase.

Please retain the original receipt safely.

This document is required as your proof of purchase.

Should this device show any defect in materials or

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ultimate speed ULG 12 A2 - IAN 277071 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ultimate speed ULG 12 A2 - IAN 277071 Manual

Product: