Preparation
Main switch OFF
WARNING
If switch is left on the standby current will continue to flow.
It is possible that damage will occur from over discharge of the battery.
Move the main switch to off position.
Confirm that all battery indicator lights are off.
STEP4 Turn off the main switch.
Confirm that pitch operation moves smoothly through the three stages.
WARNING
Do not miss the check before diving in order to prevent from serious injury.
Pull the pitch dial. Choose the speed level
with pulling dial.
11
Lay the scooter down on a level surface.
STEP5 Using the variable pitch propeller.
Lay the scooter down on a level surface.
Pull and turn the pitch control dial knob to make adjustments
to the propeller angle.
Push the dial back after speed selection.
Pitch selection
PITCH 1
PITCH 2
PITCH 3
Acceleration
Maximum speeds
Battery consumption
=Low speed purpose
=Standard purpose
=Acceleration purpose
(need more power for pulling a heavier person or weight - reduces battery life)
(most efficient setting)
The maximum speed of Pitch 2 is as same as Pitch 1.
Reach time to maximum speed of Pitch 1 is earlier than Pitch 2.
Maximum speed may be different from water current.
OFF
