Pull out throttle. Push down throttle.
How to operate
STEP1 Throttle operation
The SAV-7 speed is controlled by the rotational speed of the propeller with the throttle unit and by
adjustment of the propellers pitch. The rotational speed of the propeller rises when the throttle lever is pulled up.
The rotational speed decreases when the throttle is pushed down.
The SAV-7 has a built-in safety device that protects the motor if overloading occurs.
For example if rope gets wound around the propeller shaft the scooter will automatically stop.
The SAV-7 safety sensor protects the diver's safety from rotation rebound if the propeller becomes entangled or
otherwise obstructed.
The SAV-7 is equipped with a safety sensor to protect the motor from burn out and deterioration caused by
overloading.
If the safety device is activated, turn off the main switch once and it will be reset.
After resetting, the motor should works as usual.
Overload protection safty sensor
CAUTION
If the motor has stopped please carefully check for debris that may be obstructing or entangled in the propeller
area. Please ensure the debris is completely cleared away prior to resetting and reactivating the motor otherwise
damage may occur.
13
Operation and use
MIN
MAX
2
4
6
MIN
MAX
2
4
6
